Name: INFLATABLE 1 PERSON KAYAK
Brand: ITIWIT
Price: 219.99 GBP
Availability: OnlineOnly
Rating: 4.63 (8 reviews)

Features

Design benefits

volume

For 1 person weighing up to 100 kg (220 lbs).

easy assembly / dismantling

Inflation in 6 minutes to a maximum pressure of 1.5 psi (0.1 bar)

stability

Side tubes and a wide inflatable floor for good stability.

glide performance

The patented bow shape gives the kayak good glide performance. 3 keels.

Design details

Seat comfort

The front and back seats are high, this provides increased comfort for adults in the paddling position.

Technical dimensions and weight.

INFLATED SIZE Length: 300 cm Width: 95 cm FOLDED & BAGGED SIZE Height: 62 cm Width: 44 cm Thickness: 27 cm Weight: 11 kg Maximum pressure: 0.1 bar (1.5 PSI) Number of seats: 1 seat Content: kayak, bag, repair kit, keel PUMP NOT INCLUDED For use with an Itiwit double-action hand pump with adapters.

After-sales service

Spare parts are available for Itiwit kayaks from after-sales service. Visit the workshop at your nearest Decathlon store to collect or order some.

Inflation recommendations & precautions

Inflate the floor, then one of the side tubes, then the second one to 50%. Check the overall positioning of the chambers. Then fully inflate it without exceeding 0.1 bar (1.5 psi). DO NOT OVERINFLATE! Close the valves well. Install the 3 skegs, unless using on a river containing little water. In the event of EXTREME HEAT, slightly deflate the kayak out of the water to avoid overinflation, which could damage the kayak. Do not leave inflated in direct sunlight: risk of overinflation

Care instructions

In the event of damage to one of the side chambers, open the side tube lengthways using the zip and remove the chamber. The floor can be uncovered by opening the hook and loop fastenings. Example 1: the hole is in the side tube; you can use the repair kit to stick on a patch. Example 2: the hole is located along a seam; contact the DECATHLON workshop service to exchange the faulty bladder (2-year warranty).

Glide performance

Patented bow shape: the front and back ends provide good glide. The V-shaped front of the kayak enables smooth entry into the water.

Easy to disassemble and fold

New carry bag, backpack style for short distances. Easy clip fins. Deflate the kayak by opening the 3 "Boston" valves. Fold the lateral tubes down onto the floor. Roll, starting from the opposite side to the valves to remove the air. Place the rolled-up kayak into the main compartment of the bag. Close the zip and tighten using the compression strap.

Directions for use.

We recommend that you use the product with a buoyancy life vest.

regulations for canoes-kayaks measuring less than 3.50 metres

Is your canoe-kayak inflatable or rigid and is less than 3.50 metres? You have what is called a beach craft. You must always stay 300 metres from a shelter (any place on the coast where any boat or vessel and its crew can get to safety by anchoring or berthing and leave without assistance). Buoyancy aids are not mandatory but strongly recommended to make it easier to get back in the boat if you fall out.

More than 3.50 metre canoe-kayak rules

Your canoe-kayak is rigid or inflatable with at least 2 separate air chambers. It measures more than 3.50 metres. It is "sea approved" by the manufacturer. You can paddle up to 2 nautical miles (approx. 3 km) from shore. You will need a number of safety features. You can find these elements using this link: https://www.itiwit.fr/reglementation-pour-faire-du-canoe-kayak

level of practice	beginner
frequency	occasional
place of practice	salt water, fresh water
weather conditions	calm weather
number of persons	1 person
kayak type	inflatable kayak
maximum load	100 kg
main material	textile
type of dinghy	inflatable
condition	new
weight (in kg)	11 kg
width (in cm)	95 cm
length (in cm)	300 cm
sold in pack	not sold in pack

INFLATABLE 1 PERSON KAYAK

Features

Design benefits

Design details

Specifications

Details

Composition

Usage & care

Care instructions

Storage

Cleaning

Environmental impact

Ecodesign approach