**BONES SWISS** Legendary Original Bones Swiss bearings are the optimum combination of Bones Skate Rated design and Swiss precision manufacturing creating the standard by which all other bearings are measured. Preferred by the world’s top professional skaters since 1981. Proven, professional competition-grade speed and durability make Bones Swiss normally last several times as long as ordinary ABEC rated bearings.
*Made in Switzerland.*
*Features:*
- Single, removable, non-contact rubber shield allows easy cleaning and low friction.
- High speed nylon ball retainer provides added strength and speed.
- Pre-lubricated with Speed Cream racing lubricant
- Skate Rated; clearances, tolerances, materials and lubricant provide the best performance and durability possible.
- Best selling high end skate bearing in the U.S.A.
*Contents:*
- Set of 8 bearings
- Instructions
- Sticker
**Bones Swiss** Bearings have the best reputation in the skate industry and have had this honour since 1981, due to their performance and quality. Everyone who rides Swiss knows how fast they are and how long they last. Testimonials reveal them lasting several times longer than low cost bearings. Skaters who use Bones Swiss do so because they want the very best equipment they can get and know the difference between ordinary and exceptional. Our team is a who’s who of top skaters and we are proud to be associated with each one of them.
*Maintenance Instructions;*
- Keep your bearings dirt-free, moisture free, and lubricated. Water will rust your bearings and dirt will destroy the smoothness of the super finish on your bearing races, increasing friction.
- Clean your bearings when they become dirty or noisy with the most environmentally friendly cleaner you can find that is suitable for dissolving oil, grease, and removing dirt from the steel, plastic and rubber surfaces. We have tried many cleaners and solvents and many of them can be used safely. Citrus based cleaners can work, but they tend to leave behind a slight residue. Solvents are dangerous to use, but often provide a superior solution to cleaning very dirty bearings. If you use a water based cleaner like a citrus cleaner or a detergent, be sure to dry your bearings IMMEDIATELY and then re-coat them with lubricant to prevent rust.
- If you use a solvent cleaner, please wear appropriate rubber gloves and work in a safe well ventilated area. When you are finished, please remember to dispose of your solvent in a safe, ecologically sound manner.
- Do not add oil to dirty bearings. It will not clean the bearing, but merely flush the existing dirt further into the bearing. It may seem like they roll faster initially, but in reality you are only spreading the dirt around, and it will still be there to ruin the high precision rolling surfaces of your bearings. Clean your bearings before re-lubricating them.