Insulated Stainless Steel Flask - Grey (1.5L)


Need to keep your drinks hot or cold for several hours? Our designers have developed this large, highly insulated bottle that will do just that.

It is large in volume (1.5 litre), there is a cup included and it has a retractable handle. The most insulated of bottles.



Home delivery or Click & Collect
Store stock checker

Product benefits


Starts at 95°C: 83°C after 6 hrs, 74° after 12 hrs, 60° after 24 hrs.

Ease of use

Double opening: wide or fast to pour. Handle, cup included. Stainless steel.

Easy maintenance

Easy to clean thanks to the removable cap. Stainless steel inner wall.

Easy transport

Retractable gripping handle for transport and easy pouring.


Double wall stainless steel 18/8 (304) construction with vacuum btw two walls.

Technical information

Advice to optimise the performance of your isothermal bottle.

"Fill the bottle with boiling water for 5 minutes. Then replace the water with your beverage. Close the bottle.
The fuller the bottle, the better it is at keeping the contents hot or cold."


Cap with a wide opening but also with a quick opening system that allows you to pour easily without losing heat.

Care instructions

Wash by hand, not in the dishwasher. Rinse in clean water, then leave to dry with the cap open.

First use

Rinse the entire product 3 times with clean water before first use.

Materials and regulations

Our products and materials meet the food contact standards in force. They do not contain Bisphenol A (BPA) in accordance with the French regulations in force.

Weight and dimensions

Volume: 1.5 litre
Dimensions: Ø 12.5cm x 29cm
Weight: 980 g
Available in: 0.4 L/0.7 L/1 L/1.5 L


2 years

Product concept & technology

Product Composition

Bottle/Body 90% Stainless Steel 304, 7% Polypropylene, 3% Acrylonitrile Butadiene Styrene Cap 78% Polypropylene, 20% Stainless Steel, 2% Acrylonitrile Butadiene Styrene Joint/Gasket 100% Silicon


Wash and dry before storing. Store in a clean, dry place.

User Directions

No alcohol. Do not put in the freezer or microwave.


Our isothermal products are tested according to the same protocol: Water at 95°C is placed in the product which is then closed. The drop in the water temperature is then measured after 6, 12 and 24 hours.

Customer reviews