12 V/15 A electric pump for inflatable SUP and kayaks
Electric pump works connected to a 12V-15A outlet and provides up to 15 PSI (1 bar) of pressure on demand. Can be used to effortlessly inflate low-pressure kayaks and high-pressure SUP boards.
ID 8387582
- 365 days to return for members
ease of useSet the pressure, start the pump.
parameter measurementBuilt-in 0-15 psi pressure gauge.
lightweightWeight: 1.2 kg.
powerInflates a 300 L SUP to 15 PSI in approximately 12 minutes.- ConnectionWorks plugged into a 12V cigarette lighter socket. WARNING: The car battery must provide at minimum 15A. Provides pressure of up to 15 PSI (1 bar). Enables you to inflate low-pressure kayaks (1 to 2 PSI) and stand-up paddle boards (10 to 15 PSI).
- SAFETY CONTROLMake sure that the cigarette lighter plug is fully pushed in to avoid overheating caused by bad electrical contact.
- Operation1/ Connect the pump to the cigar lighter with the car engine running. 2/ Connect the pump hose to the SUP 3/ Select the psi/bar/hpa mode with the arrow button 3/ Pre-set the recommended pressure with the +/- buttons 4/ Start Press ON to inflate. The pump stops at the set pressure.
Features
Design benefits
Design details
Specifications
Pump Type
The type of pump and what's it's best used for.
Main Material
The main material of a shoe is the main material used to make the outer part of the shoe, generally the upper and sole. The main material influences the durability, comfort and aesthetics of the shoe.
Details
| level of practice | all levels |
| pump type | electric pump |
| main material | plastic |
| maximum pressure (in bars and psi) | 1 bar / 15 psi |
| pressure (in psi) | 0 to 8 psi , 8 to 25 psi |
| condition | new |
| length (in cm) | 25 cm |
| weight (in g) | 1200 g |
| valve type | boston, mini boston, standard valve (7 to 9 mm) |
Composition
Motor: 100.0% Stainless Steel |
Cable: 100.0% 1.2-Benzisothiazole-3(2H)-One |
Main part: 100.0% PCBA |