Tunnel Trekking Tent - 3 person - MT900 Ultralight
With its highly wind-resistant tunnel structure, it offers a small, essential living space. Features 2 doors, 1 large front porch, 3 pockets, and pre-assembled poles for quick setup and takedown.
ID 8586319
- 365 days to return for members
easy transportTotal weight 2.25 kg Compact & compressible 8L bag Dimensions 40cm x 17cm x 16cm
waterproofWater column (Schmerber): Flysheet > 2000 mm. Bedroom groundsheet > 3,000 mm
wind resistanceResists 70 km/h (Force 8) winds: Tested against gusts on a rotating platform
easy assembly / dismantlingQuick pitching: pre-assembled room and flysheet. Sleeves for the tent poles- WeightTotal weight 2.25 kg Separable parts to help transportation. Flysheet 932 g Bedroom 614 g Pole kit 450 g Pegs (13 pieces) 130 g Guy ropes (6 pieces including 2 attached to the tent) 24 g Bags 60 g + 16 g Repair kit (ferrule) 20 g To protect your product and increase your protection from the sun and bad weather, you can complement your MT900 UL 3P tent with a groundsheet (ref. 8797787). Weight, volume and dimensions can vary slightly due to manufacturing tolerances
- Inner spaceLength of the bedroom 215 cm Width of the bedroom 180 cm at the head and 140 cm at the feet Height of the bedroom 95 cm The large front porch (storage space between the bedroom and the flysheet) is 100 cm deep and 190 cm wide, more or less 2 m² offering a large storage and living space. Sheltered from bad weather, this can be used to store 3 backpacks with 50 to 70 L volume approximately, and to store and organise your bivouacking equipment. 3 pockets in bedroom.
- Architecture, tent poles and tent pegsLightweight, shock and frost resistant aluminium pole: 7001 T6 Yunan SD70PF Ø 9 mm and Ø 9.5 mm aluminium. Optimised square tent pegs: “anvil” head, oversized main part, extremely resistant and lightweight (7075 T6 aluminium). Non-anodised for a lower world impact. The two tent poles form a tunnel that is not free-standing. This structure forms a very light tent that needs to be fixed to the ground and does not stay up alone.
- Pitching/strikingExtremely quick pitching/striking. The flysheet and bedroom are pre-assembled. Insert the tent poles into the flysheet cover. It is also quick to strike. To store the tent in its bag, fold the tent in half to about the length of the bag, fold up the poles into a bundle onto the bedroom or flysheet, roll everything up tightly to slide into the bag.
- WaterproofingForclaz tents are laboratory-tested: pitched tent, 200 litres/sqm/hour (3 hours, equivalent to a tropical storm). They are also tested in the field by a sample user group. 20 denier polyester (PES) flysheet and 40D polyamide (PA) groundsheet have a polyurethane coating (inside) and silicone (exterior). Seams taped with heat-sealed strips. Multi-component bedroom combining breathability, wind protection and prevents condensation
- Wind resistanceWe test all our tents in a wind tunnel on a turntable where we can expose each side of the tent to the wind. To test its wind resistance, the tent must be properly pitched, taut but not stretched, with all the guy ropes in position around the tent. It should remain habitable at wind speeds of 70km/h, measured near ground level. Our tents are certified by the CSTB independent laboratory in Nantes.
- Ventilation and condensation preventionBedroom with mosquito screen for ventilation and water-repellent fabric to protect from condensation and draughts. Large vent at front of tent and additional vent at feet end. To reduce condensation inside your tent, it must be properly pitched, with the fabric kept taut without being over-stretched. Vents and good air flow will help reduce humidity inside your tent.
- Seasons3-season tent: your tent will protect you from the harsh weather conditions you can encounter in the spring, summer or autumn. It will withstand light snowfall but is not designed to withstand heavy loads that would weigh on the structure. In case of snow, remember to shake your tent regularly in order to bring down any snow that has accumulated to avoid putting too much weight on the structure of your tent.
- Repairs and After-sales serviceAs designers and users who love our playing field, we care about the robustness of our products, that’s why all our tents are designed to be repairable. You will find the detachable parts (poles, bedroom, etc.) in store or in the workshop of your local Decathlon, or on the website. If you have a problem, don't hesitate to have your tent looked at in your local Decathlon store. Repair kit (ferrule, patch): 20 g
- RobustYour tent is designed for itinerant bivouacking, it is therefore not designed for static use in the sun. We recommend that you avoid leaving it in the sun as the ultra-light fabrics can be sensitive to UV light, that damages them.
Features
Design benefits
Design details
Specifications
Number of Persons
Highlights the number of people that a mattress can accommodate.
Living Area
A space dedicated to lounging and general everyday activities.
Assembly Type
Ways in wich you can assemble the product.
Tent Shape
The shape of the tent.
Dome tents, often self-standing, allow not to use tent cords, which save space and time.
Tunnel tents need tent cords but offer great wind resistance and habitability.
Tepee tents are an iconic tent shape with good height and space.
Details
| frequency | intensive |
| weather conditions | mild weather |
| rain | heavy rain |
| number of persons | 3 persons |
| assembly type | assembly with poles |
| number of rooms | 1 room |
| storage space | with storage space |
| living area | without living area |
| shape of the tent | tunnel |
| main material | polyester |
| number of season(s) | 3 seasons |
| weight of the tent | 2 kg < weight < 3 kg |
| freestanding tent | non-self-freestanding tent |
| type of poles | aluminum |
| weight (in kg) | 2.25 kg |
Composition
Inner fabric: 80.0% Polyamide, 20.0% Thermoplastic Polyurethane |
Main fabric: 20.0% Thermoplastic Polyurethane, 80.0% Polyester |
Pole: 100.0% Aluminium |
