Features

Design benefits

easy transport

Total weight 800 g (mattress only 745 g). Volume: 4,6 litres.

sleeping quality

Dimensions 195 x 60 x 5 cm. Adjustable pressure by pressing the IN valve

thermal insulation

Usable in 3 seasons. R-Value 3.3 according to standard ASTM F3340-18

easy assembly / dismantling

Inflate with the built-in pump bag.Bi-valve:IN with anti-blowback;OUT to deflate

Design details

How to choose the size of your MT500 mattress

This model is available in L and XL version. The difference between the 2 sizes on the length (180 cm for the L; 195 Cm for the XL) and width (52 cm for size L; 60 cm for the XL). To choose the mattress that best suits you, you must consider your stature, but not just that. Your preference and/or your preference for space around your shoulders should also be considered. So, even if you are 1.75 cm, you will prefer the XL!

How to inflate your MT500 Air insulating mattress

To prevent moisture from being blown into the mattress, we recommend that you use the pump bag in the pouch. To do this, unroll the entire pump bag/pouch. Connect the valve of the pump bag to the “IN” valve of your mattress. Blow to about 10-20cm from the inlet of the pump bag, to inflate the main volume as much as possible. Roll the bag on itself to the valve to push the air out of the main bag into your mattress.

A tip for sleeping properly on the MT500 Air insulating mattress

Once you are lying down, remember to adjust the inflation pressure of the mattress by slightly pressing the IN valve (open cap). A mattress that is too hard is often synonymous with discomfort. Silicone patches on the top of the mattress are designed to reduce the sliding of your sleeping bag on the mattress.

How to repair a leak on your MT500 Air insulating mattress

An inflatable mattress is not puncture-proof but it can be repaired! When using it, take every care when installing and handling it. In the event of a problem, we recommend using self-adhesive repair patches (ref: 8557113).

What is the R-Value?

The R-Value is a measure of the thermal insulation. It measures the ability of a mattress to retain or prevent heat from escaping from a warm body (human body) to a cold floor. The higher the R-Value, the better the insulation of the mattress. Please note that the R-Values can be added; this means that you can use two mattresses and add their R-Values. All our mattresses are tested to standard ASTM F3340-18.

What R-Value for what use?

R-value from 0 to 1.9: Hot season (summer) only R-value from 2 to 3: Use over 3 seasons (spring/summer/autumn) R-Value from 3 to 6: Use over 4 seasons R-Value > 6: Use in all 4 seasons and in extreme conditions (glacier, far north and high altitudes)

Volume and folded size

Folded dimensions Ø 14 cm x 30 cm. Volume: 4,6 litres.

frequency	regular
weather conditions	cold weather
number of persons	1 person
mattress type	inflatable mattress
main material	polyester, polyurethane
number of season(s)	3 seasons
weight (in g)	800 g
condition	new
volume (in L)	4.5 L
width (in cm)	60 cm
length (in m)	1.95 m
mattress/pillow thickness (in cm)	0 to 5 cm
inflation system	without pump
connectible	not-connectible

Trekking Inflatable Mattress MT500 Air Insulator XL - 195 x 60 cm - 1 Person

Features

Design benefits

Design details

Specifications

Details

Composition

Usage & care

Care instructions

Usage precautions

Storage

Cleaning