A board that performs in waves from 80 cm to 2 m (Hip height to head height) with power. Its squash tail helps you pass the more mushy sections. If you are a shortboarder this is the board for you.
Handmade from laminated Epoxy resin with stringer for greater durability.
EPS foam base 30 kg/m3.
Top: Three fibreglass layers (6 oz, 6 oz and 4 oz)
Bottom: Two fibreglass layers (6 oz and 4 oz) on the back , One layer (6 oz) on the front
Rails: Two 6 oz fibreglass layers + rear reinforcement patches.
TAIL: 2 fibreglass layers (6oz and 4oz) + Innegra reinforcement patches.
5'10 X 19.7" X 2"4
(cm) 177.8 X 50 X 6
Volume: 30 L
Weight: 3 kg ±100g without fins
Co-design Olaian Ambassadors.
Squash tail to help pivot the board.
Double concave on the rear foot and single concave on the front foot which provides a good compromise between contact with the waves and rail to rail transition.
Assembly and disassembly of the FCS2 fins
1) ensure that the small side screws are unscrewed.
2) clip the front of the fin into the slot at the front of the box
3) press the back to clip it in
4) To secure the fitting you can screw in the little screws with an FCS-type tool
WARNING: after unscrewing the little screws
The fin needs to be pushed back and forth to unclip it. Protect your hands so you don’t hurt yourself with the edge.
The board has a Flexi Hex® honeycomb case inside a sturdy box.
This case is reusable in your surfing cover to protect it while transporting.
Behaviour on the water
Retrouvez les règles de bonne conduite à l'eau sur notre site Olaian.fr
2 years excluding breaking in half, breaking off the fins, bumps, and nicks.