VEO CSMM3 Triple Directional Cold Shoe Mount

The VEO CSMM3 allows you to mount three accessories with a cold shoe mount base to a tripod support arm, and adjust the angle of the side cold shoe mounts by +90° to -90°.

If your accessory base needs a 1/4" thread, or you want to attach this cold shoe multi-mount into the hot shoe mount on your camera, you can use a VEO CSM Cold Shoe.

To attach to your tripod support arm, simply screw the 1/4" thread into the base of the VEO CSMM3. While it would take any 1/4" thread, to avoid the cold shoe mount unscrewing in use, we would recommend using a tripod support arm with a bayonet fitting, such as a VEO TSA DLX model.

To attach it to your accessory, simply slot the accessory into the chosen cold shoe mount and tighten accordingly.

You can then adjust the angle of each side cold shoe mount by 180° (+90° to -90°) and you can lock the position in place using an allen key.

On the front of the cold shoe multi-mount is a 1/4" thread, allowing you to attach another suitable support arm, such as a Vanguard tripod support arms, to add further accessories.

Folding to 60mm wide (or a maximum of 88mm wide), this triple cold shoe multi-mount is more than just a solution for attaching accessories.

So why not choose your accessories and unleash your creativity?