ROLLERBONES ROLLER SKATE AND INLINE SKATE BEARINGS - 8mm - 16 PACK

**RollerBones** bearings, from the world leading **Bones Bearings**, are manufactured with internal geometries and clearances specifically modified for Roller Skating & In-Line Skating. **RollerBones** Bearings offer the greatest combination of performance, durability and low cost in the industry. Because they offer unapparelled performance at a fraction of the cost, they have become one of the best selling bearings worldwide. *Features:* - Precision ground skate bearings - Removable high speed nylon ball cages - Removable non-contact, frictionless rubber shields - Fast, long lasting, and easy to clean - Pre-lubricated with Speed Cream racing lubricant. *What's In The Box;* - Full Pack of 16, 8mm Bearings *Maintenance Instructions;* - Keep your bearings dirt-free, moisture free, and lubricated. Water will rust your bearings and dirt will destroy the smoothness of the super finish on your bearing races, increasing friction. - Clean your bearings when they become dirty or noisy with the most environmentally friendly cleaner you can find that is suitable for dissolving oil, grease, and removing dirt from the steel, plastic and rubber surfaces. We have tried many cleaners and solvents and many of them can be used safely. Citrus based cleaners can work, but they tend to leave behind a slight residue. Solvents are dangerous to use, but often provide a superior solution to cleaning very dirty bearings. If you use a water based cleaner like a citrus cleaner or a detergent, be sure to dry your bearings IMMEDIATELY and then re-coat them with lubricant to prevent rust. - If you use a solvent cleaner, please wear appropriate rubber gloves and work in a safe well ventilated area. When you are finished, please remember to dispose of your solvent in a safe, ecologically sound manner. - Do not add oil to dirty bearings. It will not clean the bearing, but merely flush the existing dirt further into the bearing. It may seem like they roll faster initially, but in reality you are only spreading the dirt around, and it will still be there to ruin the high precision rolling surfaces of your bearings. Clean your bearings before re-lubricating them.