Aqua Marina 2 Stage 12V - 20PSI Electric Pump for SUP and Kayak

For when you want to get on the water that bit quicker, the Aqua Marina Electric Pump will do the job. Save your energy for the Paddle! Specification - 12V DC electric pump up to 20psi, 110W. - Inflates iSUP boards, kayaks, boats and air platforms. - LCD screen. - Cigarette lighter or battery attachable. - Inflate: 1psi/min. Deflate: 4psi/min. Stage 1 - Volume Pump where large volume of air is pumped in quickly. Stage 2 - High Pressure mode where the pump automatically switches to lower volume but higher pressures to get your board up to 20PSI in minutes. Inflating 1/ Connect the pump to the cigar lighter with the car engine running. 2/ Connect the hose from the pump to the boat 3/ Select the pressure unit: psi/bar 4/ Set the recommended pressure with the +/- buttons 5/ Start inflating by pressing the POWER logo The pump stops automatically at the set pressure. Deflating 1/ Connect the pump to the cigarette lighter. 2/ Connect your hose to the "DEFLATE” outlet on the pump and connect it to the valve on your boat. 3/ Select the pressure unit: psi/bar 4/ Press the (-) button until “DEFLATE" appears on the screen. 5/ Start deflating by pressing the "POWER" logo. 6/ To stop deflating, press "POWER" or wait for the end of the 120-second cycle.