No trouble on any terrain
Extra grippy, extra confidence, with bigger gripping studs for those tough mountain trails.
New Lower Price
Men's Waterproof Mountain Walking Shoes - MH500 Mid Brown
Hike in comfort and safety in this mountain walking boot. Its sole, with our Outdoor Contact technology, provides good grip. This waterproof boot also has a rubber toe bumper for extra protection.
ID 8618767
- 2-year warranty
- 365 days to return for members
traction5mm studs with good grip. Rubber sole with very good grip
robustnessRubber stone guard at the front and plastic at the back of the foot
waterproofWaterproof and breathable membrane lining: your feet dry for 8hr in all weather
foot supportWeblock on 2 loops to hold the foot. Medium ankle height.- What frequency and intensity of hiking?We have classified our products in terms of performance and features for 3 levels of Mountain Walking: - occasional: around ten hikes per year of about 3 to 4 hours’ duration, less than 10km and less than 700m of elevation gain. - Regular: about 20 outings per year. 4 to 6 hours, 10 to 20 km, 700 to 1200m of elevation gain per outing. - Intensive: more than 20 times a year. More than 6 hours, more than 20 km, 1200 to 2000m of elevation gain per outing.
- Outdoor Contact soleNew high-performance sole with our new exclusive rubber blend developed by our experts. More grippy, more durable. The sole is designed for better grip using 3D simulations and then laboratory tested to assess the coefficient of grip on different surfaces and conditions. Field tests in the mountains allow us to do the final validation with a panel of testers. 30% rubber
- Waterproofing testIn a laboratory, the shoe is immersed in water to mid-height on a mechanical arm that flexes to simulates a number of steps. With this test we can determine a time and number of km that the boot can walk while staying dry. Then we confirm in the field or under the rain, that the shoe meets its promises.
- Extended waterproofingTo keep your feet dry, we advise you to use a waterproof gaiter or mini-gaiter to protect the top of your boots and prevent water, pebbles and sand from getting in. We advise re-waterproofing your boots twice a year using a re-waterproofing agent (search for ‘waterproofing’ on our Decathlon website) which will help you restore the original water-repellent qualities and help prevent stains on the outside.
- Which size should I select?Some Decathlon stores have a test route. 1. Try on both shoes, standing up, with the socks worn for hiking. 2. Tighten the laces, taking care to correctly balance the tightening. 3. Check two points: - the heel does not come up before the shoe when you walk uphill. - the foot does not slide and the toes do not press against the front when going downhill. 4. Try on several sizes and models. Break them in gradually to adapt them to your foot.
- How to prevent blistersBlisters generally develop when the skin is weakened by friction. In order to prevent them from occurring, we recommend the following: - Choose a shoe in your size. - Wear suitable socks - Tie and tighten your shoes properly. - Make sure you tighten or loosen your laces accordingly while wearing your shoes, especially before starting a climb or a descent. - Wear your shoes on a short trip for the first use.
- Which socks?A waterproof shoe will be less breathable than a non-waterproof shoe. Mid-length socks like the MH500, MH520 and MH900 are therefore preferable for absorbing perspiration and reducing overheating.
- Optimise the capabilities of your shoes by replacing your insolesThe original insole in your shoes is designed to accommodate most feet. A change of insole can bring: 1. Improved support: some soles are preformed or reinforced to better support the arch of the foot. 2. More comfort: the insoles can also provide heat and/or cushioning. 3. Longer life: restore the support and comfort of your shoes by replacing the insole each season.
- How should you look after your shoes?- Leave to air dry. - Remove dry mud with a stiff brush. - Clean marks using a brush and some warm water - Leave to dry - Spray with a re-waterproofing product to restore the water-resistance to the upper.
- Product design: our expertiseOur Quechua global design centre is based in Passy, at the foot of Mont-Blanc in Haute Savoie. This location makes it a real meeting place for our teams (designers, product managers, engineers, etc) and outdoor sports enthusiasts. A great asset for designing your mountain walking products and providing you with all our expertise.
Features
Design benefits
Design details
Specifications
Details
| frequency | regular |
| place of practice | forest, outdoor, mountain |
| tightening type | laces |
| shoe height | mid shoes |
| main material | leather |
| playing surface | technical trail and path |
| waterproof | waterproof |
| foot width | medium |
| drop | 10 mm |
| removable insole | removable insole |
| outsole technology | Outdoor contact |
| season | spring, summer, autumn |
| type of leather | crust leather |
Composition
Outer sole of: 60.0% Synthetic Rubber, 40.0% Ethylene Vinyl Acetate |
Upper of: 20.0% Polyurethane, 40.0% Polyester, 40.0% Acetate |
Lining and sock of: 100.0% Polyester |
Usage & care
Environmental impact
Ecodesign approach
Analysing the product's environmental footprint enabled us to identify the most impactful stages of its life cycle. Thanks to this approach, our design teams were able to develop this product while significantly reducing its environmental impact.More about our approach
Recycled rubber
Product made from 9% recycled rubberUsing recycled rubber rather than conventional rubber reduces the CO2 emissions linked to the material by at least 26%.
Dope dyed
Product made from 6% dope dyed yarnUsing this mass-dyeing process enables us to reduce CO2 emissions linked to the production of dyed textiles by at least 17% compared to conventional dyeing.
Recycled polyester
Product made from 6% recycled polyesterUsing recycled polyester rather than conventional polyester reduces the CO2 emissions linked to the material by at least 17%.
