Name: Men's waterproof mountain walking jacket MH500
Brand: QUECHUA
Price: 59.99 GBP
Availability: OutOfStock
Rating: 4.62 (1989 reviews)

Features

Design benefits

waterproof

Protects from storms 3 layer membrane, 15000 mm Schmerber

breathability

29 cm side openings and component that wicks away perspiration (RET=6)

lightweight

Only 574 gr in size L

freedom of movement

Stretch fabric with 13% elastane for freedom of movement

Design details

Cut

Slim fit with raglan sleeves and good stretch properties for plenty of freedom of movement during your hikes. A warm layer, such as a fleece or light padded jacket, can be worn underneath.

Hood

Adjustable height with an elastic cord and tightening toggle. Integrated semi-rigid visor to provide high level protection. The small detail that makes the difference: a triangular opening on the side of the hood for better visibility to the sides.

Main component

3-layer component with membrane

MEMBRANE

The waterproof rating of a product depends on the following two main criteria: its component and its construction. This product was made with a membrane. This is a kind of very thin plastic film (polyurethane) that makes the component waterproof while remaining breathable. It has the advantage of being flexible, lightweight and breathable.

LAYER DESIGN

3 layer design: The membrane is glued between the outer and inner fabric. We use it for durable and high-performing jackets

COMPONENT WATERPROOFING

Laboratory tests are conducted to guarantee the waterproof rating of a component. This is done by measuring the fabric's resistance to water pressure expressed in terms of the height of a water column in mm (based on the ISO 811 standard). The higher the water pressure, the more waterproof the fabric. This product's component has a 15,000 mm waterproof rating and can withstand the pressure of a 15,000 mm water column. This is also equivalent to 15000 Schmerbers.

Water resistance of the jacket

We conduct laboratory tests that simulate rainfall scenarios in order to guarantee the jacket's waterproof rating. This garment has been validated in a shower test under 100 L/sqm/hr of water for 3 hours. This test reproduces the average conditions of a mountain storm.

BREATHABILITY

Component breathability is measured by its thermal evaporative resistance (RET). This is its capacity to let water vapour generated by the body during physical activity escape and therefore avoid water accumulating on the skin. The lower the RET, the more breathable the fabric. RET ≤ 6: very breathable fabric RET ≤ 12: breathable fabric RET ≤ 20: not very breathable fabric This product was assessed at 6 RET

HOW TO RESTORE THE WATER-REPELLENT PROPERTIES

A fabric is water repellent when it allows water slide over its surface without seeping in. The fabric does not soak up water and therefore remains lightweight and breathable. The water repellent property is achieved by treating the fabric's exterior. This treatment needs to be renewed during the lifetime of the garment. The water-repellent property can be reactivated by putting the jacket in the tumble dryer for 10 minutes on low heat. You can also use the waterproof spray (ref 855490)

Product design: our expertise

Our Quechua global design centre is based in Passy, at the foot of Mont-Blanc in Haute Savoie. This location makes it a real meeting place for our teams (designers, product managers, engineers, etc) and outdoor sports enthusiasts. A great asset for designing your mountain walking products and providing you with all our expertise.

We have reduced our environmental impact on this product

This jacket optimises the consumption and weight of the main component. This reduces the environmental impact of this product. We have reduced the CO2 impact by 31% compared to the previous product.

level of practice	intermediate
frequency	regular
place of practice	mountain
weather conditions	cool weather, dry weather, rainy weather
rain	drizzle, storm, light rain, moderate rain, heavy rain
fit	fitted
ventilation system	with zip ventilation
main material	synthetic
waterproof	waterproof
hood	with hood
pocket	zip closed pocket
style	plain
membrane construction	3 layers
mm H2O (Schmerbers)	25,000 mm
type of length	at the hips
windproof	windproof
sleeves length	long sleeves
type of waterproofing	membrane
season	all seasons
RECCO system	without integrated RECCO system
thumb pass	without thumb pass
type of hood	adjustable hood
breathability (in RET)	RET < 6 : breathable

Men's waterproof mountain walking jacket MH500

Features

Design benefits

Design details

Specifications

Details

Composition

Usage & care

Care instructions

Storage

Cleaning