KIDS’ AND ADULT SKIING AND SNOWBOARDING MASK G 500 - BAD WEATHER GREY

£24.99

The mask gives you a good field of vision with a powerful anti-fogging treatment for skiing in bad weather. Suitable for glasses wearers

This ski mask helps you see better in snow and fog with its anti-fog, dual lens which slows down fogging. Compatible with prescription glasses

Color: Pearl grey / Pebble grey
Size: size guide

Quantity:

Product benefits

Sun protection

100% anti-UV. Clear S1 lens so that you see the terrain when it's snowing & in fog

Anti-fogging

High-performance anti-fog, double lens anti-fog treated and ventilated frame

Field of vision

Cylindrical lens with high performance field of vision

User comfort

Double density foam and comfortable fabric

Stability

40 mm wide elastic with double non-slip silicone strap

Adjustable

2 buckles to adjust the length of the elastic

Compatibility

OTG, suitable for prescription glasses wearers, maximum width 145 mm

Technical information

100% UV protection

Because UV rays are harmful to eyes, all our goggles are certified 100% ANTI UV by the EN 174 standard. Masks are the best protective solution as they perfectly enclose the eyes preventing any direct or reflected UV light from entering.

S1 screen

S1 is a light lens for seeing better in bad weather, fog or snow. We have selected a lens with a yellow or pink tint, depending on the preference of each person, to improve the visibility of the terrain in bad weather. However, visibility can be low in these weather conditions. You must be careful and not place yourself in danger in unknown and hazardous areas.

High-performance anti-fogging

The "PERFORMANCE" anti-fogging system is a double lens with a treatment on the inside combined with a ventilation system on the frame that enables air to circulate inside the ski goggles.
For good ventilation inside your goggles, do not obstruct these air vents with a neck warmer, for example.

Double lens

Goggles with dual screen to reduce condensation. Indeed, the air that is trapped between the 2 lenses creates a layer of thermal insulation. Thanks to this, the thermal shock between the inside and the outside of the mask is lower and therefore fogging slows down on the mask's inner lens. To complement this, the inner lens is also given an anti-fog treatment.

Wraparound lens

Cylindrical double lens, made of polycarbonate for the outer lens and cellulose polycarbonate for the inner lens, both cut to fit the shape of the goggles.

Ski helmet compatibility

All Wedze ski goggles are designed to fit perfectly with Wedze ski helmets.

Compatibility with prescription glasses

The G 500 S1 ski mask in size L allows for the use of prescription glasses with a maximum width of 145 mm. The foam on the sides and the shape of the goggle skirt leaves a passage for each temple.

Strap

40 mm-wide Polyamide, Polyester and rubber elastic, non-slip silicone strap.

CE - EN 174 Standard

The EN 174 Standard is a European standard applicable to masks used for eye protection when downhill skiing or similar activities such as snowboarding.

Avoid fogging

Moisture causes fogging. You must therefore make sure that the foam does not get damp, e.g. by placing the goggles on a wet helmet or a hat. Falling face down in the snow can also cause your goggles to fog up. This is why you must always correctly dry your ski mask overnight to get rid of all traces of damp and go skiing again the following day with a thoroughly dry mask.

2 sizes

Choose your mask size according to your head size. Up to 55 cm, choose size S, from 56 choose size L.

Warranty

2 years

Product concept & technology

Product Composition

Lens 60% Polycarbonate, 40% Acetate Frame 100% Thermoplastic Polyurethane Elastic band 36% Rubber - Synthetic, 33% Polyamide, 31% Polyester Foam 100% Polyurethane

STOCK ADVICE

Tip: store the mask in a Wedze case after use.

TESTS

All Wedze products are tested under the actual conditions of use for which they were designed: in the snow, in the cold, and in all possible conditions you may come across when skiing. The design teams, product managers, engineers and pattern designers check that the programme, for which the product is designed and developed, perfectly matches its use in the field.

Maintenance advice

Clean your glasses with either a microfibre or spray cleaner.. If there are any marks on your glasses, make sure you first run them under a cold tap, do not wipe them dry.. Dry after each usage.. Dry in a dry and ventilated place.. Dry in the open air..

Customer reviews

Loading