Features

Design benefits

waterproof

Coating: 2,000 mm (Schmerbers) Fully taped seams Long sleeves

breathability

Hydrophilic coating (RET=11): limits condensation inside the garment

compatibility

Sufficient coverage for a 0-60L backpack

lightweight

From 340g (S/M) to 380g (L/XL) so you can forget about it in your bag

Design details

Fit and sizing information

Good coverage for hikers between 157 and 173 cm in height (size S/M) or 174 and 190 cm (size L/XL) and carrying a 60L maximum backpack. Hood can be tightened thanks to elasticated drawcord and stopper toggle. The ends of the sleeves are cuffed with an elastic binding that prevents water from entering your sleeves. This rain cape is easy to get on and off thanks to its long front zip which slips easily over the head.

Additional recommended products

To complete your outfit, we recommend overtrousers or waterproof gaiters to fully protect your lower legs. For greater breathability, the waterproof hat can also be attached to the poncho!

Component waterproofing

We measure a fabric's resistance to water pressure, expressed in terms of the height of a water column in mm (based on the ISO 811 standard). The higher the water pressure, the more waterproof the fabric. Components scoring 2000 mm can resist the pressure from 2000 mm of water (which is equivalent to a rain shower lasting two hours).

Waterproofing of the garment

This garment has been validated in a shower test under 60 litres of water / m² / hour for 2 hours. This test reproduces the average conditions of a rain shower in the mountains.

Component breathability

Our rain poncho and cape ranges do not come with a waterproof/breathable membrane. Therefore, we recommend calm, gentle use to reduce perspiration rather than fast hiking!

Component water resistance

The water-repellent property of a fabric is its capacity to make water run off its surface without absorbing it. This prevents the fabric from soaking up water and keeps it lightweight, warm and breathable. The water repellent property is achieved by treating the fabric's exterior. This treatment needs to be renewed throughout the lifetime of the garment (every 3 washes). All Quechua ponchos and capes have a water-repellent treatment.

Care

We recommend you use a re-waterproofing product (spray or liquid) To renew the fabric's water repellent-properties and optimise the garment's performance throughout its lifetime.

frequency	regular
weather conditions	rainy weather, bad weather
fit	loose
ventilation system	without zip ventilation
main material	synthetic
waterproof	waterproof
hood	with hood
style	plain
pocket	with pocket, closed pocket
backpack compatibility	0 to 60 L
windproof	windproof
type of length	at the knees
sleeves length	long sleeves

frequency	regular
weather conditions	rainy weather, bad weather
fit	loose
ventilation system	without zip ventilation
main material	synthetic
waterproof	waterproof
hood	with hood
style	plain
pocket	with pocket, closed pocket
backpack compatibility	0 to 60 L
windproof	windproof
type of length	at the knees
sleeves length	long sleeves

Raw material	81.949%
Manufacturing	3.037%
Packaging	5.992%
Distribution	6.014%
Use	2.705%
End of life	0.302%

frequency	regular
weather conditions	rainy weather, bad weather
fit	loose
ventilation system	without zip ventilation
main material	synthetic
waterproof	waterproof
hood	with hood
style	plain
pocket	with pocket, closed pocket
backpack compatibility	0 to 60 L
windproof	windproof
type of length	at the knees
sleeves length	long sleeves

Hiking rain poncho - MT500 - 60L - Black

Features

Design benefits

Design details

Specifications

Details

Composition

Specifications

Details

Composition

Usage & care

Care instructions

Storage

Cleaning

Environmental impact

Carbon footprint

Ecodesign approach

Specifications

Details

Composition