Features

Design benefits

robustness

Resists up to 2500 shots against an inclined flat surface at 50 km/h (laboratory tested).

bounce

32 panels with 2 laminate layers combined with a latex / butyl bladder.

lasting air retention

Latex bladder.

Design details

Design

We have conducted numerous lab tests to guarantee the ball's ability to withstand every hit.

Circumference

Between 68.5 and 69.5 cm (Size 5)

Sphericity

Average measured variation: maximum 2%. We measure the football's sphericity at 16 different points and examine the recorded discrepancies. If the discrepancy is greater than 2% (FIFA Pro Standard), our engineers are tasked with improving the sphericity to ensure a consistent bounce.

Maximum pressure loss

We inflate the ball to the recommended pressure (meaning 0.8 bar). 72 hours later, the ball must not lose more than 15% of its pressure, meaning approx. 0.1 bar. The pressure after 72 hours must, therefore, be at approx. 0.7 bar. This also means that it is quite normal for a ball to lose pressure after a few days.

Maximum water absorption

We simulate rainy playing conditions in a lab, leaving the ball to sit in 2 cm of water on a pivoting support whilst subjecting it to 250 compressions. By the end of the test, the ball must not have absorbed more than 20% of its weight, or approx. 80 g for this ball in the French colours in size 5.

Weight

Between 420 and 445 g (Size 5)

Bounce

Between 125 and 155 cm with a maximum difference of 10 cm between the ball's highest and lowest bounce. Each ball is dropped 10 times on a steel plate from 2 metres in height.

Shape and pressure retention

The most demanding test that this ball is subjected to is the machine shot test. Resists up to 2500 shots against an elevated flat surface at 50 km/h at a distance of 2.5 m. At the end of the test, we check: - the ball's general state: stitching must withstand this test - the circumference: must not have increased by more than 1.5 cm. - the sphericity: it must not have varied by over 1.5% - the pressure: loss of pressure must not exceed 0.1 bar.

level of practice	beginner, intermediate
intensity	low intensity, mid intensity, moderated
playing surface	grass, short synthetic grass, long synthetic grasse, artificial grass
handle	without handle
ball size	size 5
main material	polyester
diameter (in cm)	70 cm, 65 cm
type of finish	machine sewn ball
condition	new
player type	fan, player
country	netherlands
event	Euro
approval	FIFA Basic

level of practice	beginner, intermediate
intensity	low intensity, mid intensity, moderated
playing surface	grass, short synthetic grass, long synthetic grasse, artificial grass
handle	without handle
ball size	size 5
main material	polyester
diameter (in cm)	70 cm, 65 cm
type of finish	machine sewn ball
condition	new
player type	fan, player
country	netherlands
event	Euro
approval	FIFA Basic

level of practice	beginner, intermediate
intensity	low intensity, mid intensity, moderated
playing surface	grass, short synthetic grass, long synthetic grasse, artificial grass
handle	without handle
ball size	size 5
main material	polyester
diameter (in cm)	70 cm, 65 cm
type of finish	machine sewn ball
condition	new
player type	fan, player
country	netherlands
event	Euro
approval	FIFA Basic

Football Size 5 - Netherlands 2024

Features

Design benefits

Design details

Specifications

Details

Composition

Specifications

Details

Composition

Usage & care

Care instructions

Usage precautions

Storage

Specifications

Details

Composition