500 Women's Waterproof Sailing Oilskin - Blue

£59.99

Designed for regular inshore sailors (less than 15 days per year), in all weather.

This long, waterproof and breathable women's jacket will provide long-lasting protection in bad weather, whether you are inshore sailing or just out and about.

Color: Asphalt blue
Size: size guide

Quantity:

Product benefits

Waterproof

Approved under simulated moderate rain (100 L/sqm/hr) for 3 hours. Flap pockets

Breathability

Very breathable hydrophilic membrane (RET=12)

Pockets

One interior pocket and two hand-warmer zip pockets. Two cargo pockets.

Technical information

WATERPROOFING

- Dual-layer membrane
- >5000 mm of water pressure after 5 washes
- 100% taped seams.
- 2-way adjustable hood.
- Sleeve cuffs adjustable by rip-tab strips.
- Central opening features a flap with a drainage channel for optimal waterproofing.

BREATHABILITY

RET <12: very breathable.
Nylon/mesh lining to optimise perspiration wicking.

To find out whether a fabric is breathable, we measure its evaporative resistance, or RET, (test based on the ISO 11092 standard). It is its ability to allow the water vapour produced by the body during exercise to escape.

Comfort

- Adjustable waist, built into the pockets.
- Two-way zip.

RESISTANCE TO WEAR

- Treatment stopping the oxidation of the membranes.
- Zip resistant to salt oxidation

A score to compare the environmental impact of products

The environmental impact of the product is calculated over its entire life cycle with different indicators. An overall score of ABCDE is designed to help you easily identify the products with the best environmental performance by comparing products of the same type (T-shirts, trousers, backpacks...).Decathlon is a voluntary participant in this environmental labelling initiative. For more information, visit: http://sustainability.decathlon.com/

HOW TO REACTIVATE THE JACKET'S WATER REPELLENCY step 1: before washing

Close all zips and flaps and remove any parts of the garment that cannot be washed. Also remember to loosen the straps and elastic parts and empty the pockets.
Then turn the garment inside out to wash it.

HOW TO REACTIVATE THE JACKET'S WATER REPELLENCY step 2: washing

You can wash your jacket on a synthetic cycle at 30° or 40°C with your usual detergent. Do not use fabric conditioner, which could damage the existing performance of the garment, or bleach.

Also take care not to bend your jacket too much when you place it in the washing machine and do not overload your machine.

Very important: select a thorough rinse or double rinse to completely remove all detergent residue.

HOW TO REACTIVATE THE JACKET'S WATER REPELLENCY step 3: drying

If, despite this procedure of washing and thorough rinsing followed by gentle drying in a tumble dryer, the drops of water no longer run off the surface of your jacket, we recommend that you "re-waterproof" it using a waterproofing spray.

Warranty

2 years

Product concept & technology

Product Composition

Main fabric 100% Polyamide Main lining 100% Polyester

STOCK ADVICE

Store in a dry place, but do not leave your garment on a heat source such as a radiator, as this may damage the breathable membrane.

Maintenance advice

Machine wash - 30° max - normal

Do not bleach

Tumble dry - low heat

Do not iron

Do not dry-clean

Video

Customer reviews

Loading

Environmental Impact

co2-impact-cover
The carbon footprint of this product is:
233.85 kg CO2e
1 kg of CO2e represents 5km in a petrol car (according to the Base Carbone© of ADEME)
What's the carbon footprint ? We evaluate the environmental impact of all our products. At all stages of their life cycle: from the extraction of the raw material, passing through transport to the plant which transforms them, the transformation, the manufacture, the transport of the finished product, until its use and end of life. Find out more
environmental-score-cover
The environmental note of this product is: E
environmental-score
What is the environmental note? Overall environmental score for this product in comparison to others in the same category. It is calculated based on its impact on the environment (air and water emissions, greenhouse gas emissions, depletion of natural resources) at each stage of its life cycle, according to a system managed by ADEME. Find out more