Features

Design benefits

non-messy

This kit effectively protects your lower back, chest and face from muddy spray

easy assembly / dismantling

Fits to its screwed-on brackets in just one click and keeps its position setting

compatibility

This kit fits 26" to 29" mountain bikes with a telescopic fork

Robustness

The rear features a "fuse" arm (that unclips) in case of high impacts

Design details

LEVEL OF PROTECTION

This wide, shock-resistant mudguard kit stops mud getting sprayed onto the rider's lower back, chest and face. For best results, position the rear mudguard blade as close as possible (2 to 3 cm) to the wheel. You can't completely avoid muddy splatters when it's damp... But for getting from A to B, we recommend using a hybrid bike mudguard kit (with longer blades that are closer to the wheels), if compatible with your bike frame and tyre width.

Bike compatibility

This kit is suitable for 26" to 29" mountain bikes, with a tyre width up to 2.8" in 27.5" and 2.6" in 29", equipped with a telescopic fork. To ensure a good fit at the front, the internal diameter of the steerer tube must be between 18 and 34 mm.If the front blade interferes with the underside of the frame (for example in small sizes), it is possible to move the blade forward. To ensure a good fit at the rear, the diameter of the seat post must be between 25.4 and 34.9 mm.

BOX CONTENTS

The front mudguard comes fully assembled and ready to be mounted, with a 23 mm medium expansion socket. To make this product compatible with as many different telescopic forks as possible, there are 2 additional expansion sockets included in this kit: 1 smaller, 18 mm one and 1 bigger, 31 mm one.The rear mudguard comes fully assembled and ready to be mounted, no matter the diameter of your seat post.

A MODERN, EFFICIENT DESIGN

With dimensions that fit all the new wheel and tyre sizes on the market, and with a bold design, our mudguard kit gives your bike a modern, dynamic look. Everything has been designed to give you the best experience: - A reliable screw-on bracket that holds the mudguards in the same position each time - An easy system to clip the blades onto and take them off your bike depending on the weather - Compatibility with accessories (camera, lights)

Compatible Accessories

In dry weather, when there's no rain and mud about, you can unclip the blade from the rear bracket and clip a sports camera on instead. The camera must be compatible with the GoPro bracket system. To keep you safe when riding early in the morning or late at night, there's a rail at the end of the rear blade that you can clip a rear, red light to: CL 100, CL 500, CL 900, ST 500 or RL 510 LED.

Dimensions and weight

Front: Blade length: 553 mm Blade width: 73 to 97 mm Total weight: 120 g Rear: Blade length: 497 mm Blade width: 73 to 95 mm Total weight: 230 g

wheel size	27.5+", 26", 27.5", 29"
position	front + rear kit
type of binding	on saddle stem, on fork pivot
condition	new
main material	polypropylene
assembly type	with screws provided
intensity	all intensities

wheel size	27.5+", 26", 27.5", 29"
position	front + rear kit
type of binding	on saddle stem, on fork pivot
condition	new
main material	polypropylene
assembly type	with screws provided
intensity	all intensities

wheel size	27.5+", 26", 27.5", 29"
position	front + rear kit
type of binding	on saddle stem, on fork pivot
condition	new
main material	polypropylene
assembly type	with screws provided
intensity	all intensities

26" - 27.5" - 29" Front/Rear Rigid Mountain Bike Mudguard Kit V2 - Black

Features

Design benefits

Design details

Specifications

Details

Composition

Specifications

Details

Composition

Usage & care

Care instructions

Usage precautions

Cleaning

Environmental impact

Ecodesign approach

Specifications

Details

Composition