Features

Design benefits

warmth

Double wadding lining (2 X 200g/sqm) on the body. 200g/sqm layer on the arms.

waterproof

Waterproof membrane 15 000 mm H²O (Schmerber). 100% taped seams

limits snow entering

Anti-blizzard hood (synthetic fur), sleeves, tightening at the waist.

ease of use

Zips and press studs that are easy to use with gloves.Internal mesh pockets.

Design details

Can I be sure that my jacket is warm enough for my winter hikes?

We developed your jacket for intense wintry conditions: intense cold, snow, blizzards. The insulation is provided by thick wadding made of a synthetic component that insulates by trapping air in its fibres (double layer on the body and single layer at the arms). We added a long inner flap underneath the zip to stop cold air from entering. The system is supplemented by a drawcord at the hem to make the jacket comfortable down to -20°C.

How does my jacket protect me from outdoor conditions?

Your jacket is designed with a waterproof outer component that keeps out water and wind. To keep you warm in winter you must also protect your extremities (head, hands, feet). The anti-blizzard hood with detachable synthetic fur, wrist sleeves and a rising collar prevent cold infiltration. The high handwarmer pockets with fleece lining are perfect for protecting your hands in a comfortable position.

WATERPROOFNESS OF THIS JACKET

The waterproofness of a jacket isn’t limited to just its components: the assembly technique of the different parts is also an evaluation criterion. Whether heat-sealed or sewn then waterproofed, the overall waterproofness of your jacket is measured using a shower test developed by Decathlon, which simulates rain of different intensities. As such, this waterproof jacket protects you from a downpour, i.e. 12 cm of rain in 2 hours.

COMPONENT WATERPROOFING OF THIS JACKET

The waterproofness of a fabric, provided by a coating or membrane, is measured in Schmerber or mm H²0 (pressure exerted by a column of water). The higher this number, the more waterproof the fabric. This jacket has a waterproof component (JIS 1092 standard) resistant to 15 000 mm H²0 (Schmerber) before washing.

Water often gets in through the seams. Does my jacket have waterproof seams?

Your jacket is waterproof thanks to its taped main seams. Waterproof tape is added to the seams inside the garment to make them watertight so that water cannot enter through the more vulnerable areas. We validated the waterproofing with a shower test specially designed to replicate the conditions of a two-hour shower. We also wore it in the field in all weather conditions to make sure that it is suited to your activities.

A practical jacket with smart details

Practical and smart details: 2 hand warmer pockets, 2 outside pockets with flap, 1 secure inside pocket, 2 inside mesh pockets to have everything close at hand. The main zip has a long zipper pull and press studs and thumb pass so you can open or close your jacket while keeping your hands tightly snug in your gloves. The 2 easy zips at the bottom of the jacket allow you to bend or sit down comfortably.

A comfortable, unique style extreme cold jacket

We designed this jacket with a comfortable fit so that it could be worn with a warm second layer such as fleece or light down jacket. Its longline parka style is ideal for protecting you from the cold and wind during your winter hikes in large hilly areas or in the mountains.

Will my jacket withstand regular use over the long-term?

To ensure the durability of our products, we perform tests on the selected components: resistance to rubbing and abrasion, colour fastness, resistance to repeated washing. All these tests have been carried out on the component on your jacket.

How to preserve the technical qualities of my jacket?

A fabric's water repellent property is its capacity to make water run off its surface without seeping in. This prevents the fabric from soaking up water and keeps it lightweight, warm and breathable. The water repellent property is achieved by treating the fabric's exterior. This treatment must be renewed throughout the garment's lifespan (recommended after each wash). Products (spray or liquid) for this purpose are available in our stores.

How to dress properly for snow hiking?

To dress properly in winter, whatever your activity, we recommend using the 3-layer principle: layer 1: The high-tech base layer transfers moisture away from the body to keep your skin dry. layer 2: The second layer (fleece, sweater) provides warmth and transfers moisture outwards. layer 3: The jacket protects you from the outdoor conditions: rain, snow, wind. The whole outfit must be breathable in order to eliminate moisture.

How does my product warranty work?

This product is guaranteed for 2 years from the date shown on the sales receipt. A product covered by the warranty will be exchanged free of charge. The warranty covers product defects, excluding those resulting from normal wear and tear and improper use.

frequency	regular
ventilation system	with zip ventilation
main material	synthetic
waterproof	waterproof
hood	with hood
pocket	snap button, inside pocket, zip closed pocket, warm fleece pocket
style	plain
membrane construction	2 layers
mm H2O (Schmerbers)	15,000 mm
windproof	windproof
fit	straight
lining material	synthetic
type of length	mid-thigh
season	winter, autumn
sleeves length	long sleeves
type of waterproofing	membrane
thumb pass	without thumb pass
type of hood	adjustable hood, anti-blizzard hood, removable fur, lined hood

Women’s winter waterproof hiking parka - SH900 -20°C

Highlights

Highlights

Highlights

Features

Design benefits

Design details

Specifications

Details

Composition

Usage & care

Care instructions

Storage

Cleaning

Environmental impact

Ecodesign approach