Highlights

Rip-resistant outer

To increase your jacket's lifespan, it's lined in reinforced mesh fabric which resists rips.
Responsible Down Standard Certification

Our feathers are certified by RDS.

Highlights

Men’s mountain and trekking padded and hooded jacket - MT500 -10°C

Rip-resistant outer

To increase your jacket's lifespan, it's lined in reinforced mesh fabric which resists rips.

Features

Design benefits

warmth

Comfortable between 0°C and -10°C. Down with a fill power of 800 CUIN.

compact design

Easily packs into its storage bag

water repellent

Surface-treated outer fabric free from PFC to prevent water from getting in

robustness

Outer fabric with reinforced mesh to stop tears from worsening

Design details

How warm is this padded jacket?

This padded jacket, worn as a 3rd layer, has been certified for an active comfort temperature of -10°C during a standardised test in a thermal chamber. The model is wearing a synthetic long-sleeved T-shirt and a light fleece underneath. It works with a simulated 5 km/h wind. We have also tested this model in static mode. Its comfort temperature is 0°C in this case.

The advantages of a duck down and feather filling

The filling power of down has 3 advantages for mountain sports: - Thermal insulation thanks to the air trapped in the down and feathers. - Ultra-lightweight: down is lighter than synthetic wadding while offering the same degree of warmth. This saves even more weight in your backpack. - Ultra-compressible.

How to measure the fill power of a down and feather wadding?

The fill power is a measure of the down's thermal insulation capacity and its potential to "trap" air. It is expressed in CUIN (cubic inches). So, down with a higher fill power (higher CUIN number) will occupy more space, trap more air and provide greater thermal insulation. This puffer jacket, filled with 90% down and 10% feathers, has a guaranteed fill power of 800 CUIN (international standard) or over.

Weight of filling

XS: 122 g S: 131 g M: 140g L: 149 g XL: 159 g 2XL: 170 g 3XL: 181 g 4XL: 192g

How to care for a down jacket?

The down jacket can be worn throughout the winter and will certainly need to be washed. But the less you wash it, the more it will retain its thermal insulation and water repellency. Our advice: 1/Machine wash with a detergent suitable for down or technical garments, at 30°, with 2 or 3 tennis balls. Gentle spin cycle. 2/ tumble dry with 2 or 3 tennis balls, and repeat 2 or 3 times until it is completely dry.

Water-repellent property of component (not to be confused with waterproofing)

The water repellent property of a fabric is its ability to make water run off its surface without absorbing it. This prevents the fabric from swelling, and keeps it lightweight and warm. The fabric of this down jacket is water repellent, however, we recommend that you wear a waterproof jacket over it in the rain. The fabric is made water-repellent by treating (PFC-free) its outer surface, however this property may deteriorate with use. We recommend that you restore it after each wash.

How to restore the water-repellent properties?

Once you have cleaned your padded jacket, we recommend you use a water-repellent reactivator spray to preserve the hydrophobic properties of the outer fabric. This renews the fabric’s water repellent properties and optimises its performance throughout the lifespan of your garment.

A snag? How to repair your fleece

A tear on a padded jacket can happen when trekking! The good news is that it can be repaired with a repair patch to prevent the tear from getting bigger or feathers from escaping. Don't you feel at ease carrying out this repair yourself? Don't worry! Some Decathlon workshops offer an in-store repair service to mend your padded jacket using a heat-bonded patch.

Introducing our4-layer system

frequency	regular
number of pockets	5 pockets
storage	with storage cover
hood	with hood
pocket	inside pocket, zip closed pocket, with pocket
waterproof	water repellent
style	plain
main material	down
type of length	at the hips
condition	new
windproof	not windproof
air temperature	- 10°C
fit	straight
sleeves length	long sleeves
thumb pass	without thumb pass
type of hood	adjustable hood

Raw material	88.631%
Manufacturing	3.198%
Packaging	0.286%
Distribution	5.179%
Use	3.389%
End of life	-0.684%

Men’s mountain and trekking padded and hooded jacket - MT500 -10°C

Highlights

Highlights

Highlights

Features

Design benefits

Design details

Specifications

Details

Composition

Usage & care

Care instructions

Usage precautions

Storage

Cleaning

Environmental impact

Carbon footprint