Free Delivery over £30* | Free Click & Collect at Decathlon Stores | 365 Days to Return

Soft and hard-wearing braided hose

  • 45 - Diving Scuba Diving - Regul. hose. 76cm HyperflexP SUBEA - Scuba Diving
  • 45 - Diving Scuba Diving - Regul. hose. 76cm HyperflexP SUBEA - Scuba Diving
  • 45 - Diving Scuba Diving - Regul. hose. 76cm HyperflexP SUBEA - Scuba Diving
  • 45 - Diving Scuba Diving - Regul. hose. 76cm HyperflexP SUBEA - Scuba Diving
  • 45 - Diving Scuba Diving - Regul. hose. 76cm HyperflexP SUBEA - Scuba Diving
  • 45 - Diving Scuba Diving - Regul. hose. 76cm HyperflexP SUBEA - Scuba Diving
Reference : 8502966
Add to my wish list
Product already added
45 - Diving

SUBEA 76cm SCD braided Hyperflex SCUBA diving regulator hose neon pink

SUBEA
4.2/5

Colour : Fluo crimson

Decathlon
until £19.99 -%

From

£19.99**
This price includes a recycling fee for electrical equipment and batteries DecathlonDeeeTaxMentionAfterPrice / Since

From To

* Sales from to Until end of stock
* From and limited stock
£19.99 %
Before£0.00NoW£19.99**
This price includes a recycling fee for electrical equipment and batteries DecathlonDeeeTaxMentionAfterPrice / Since

* From To

* Sales from to Until end of stock
* From and limited stock
Check availability in store
Our team has designed a braided hose to allow you to adjust or customise your regulators. Soft and hard-wearing underwater diving regulator hose. This hose is adaptable to all first and second stages of regulators.

PRODUCT BENEFITS

Flexibility Neon pink or black medium-pressure hose, 76 cm length.
Durability Braided nylon coating (durability and flexibility) + two hose sleeves

TECHNICAL INFORMATION

Technical specifications

Length: 76 cm.
First-stage connection: 3/8 UNF male connection. Tighten with a 9/16 inch wrench (between European sizes 13 and 14).
Second-stage connection: 9/16 UNF female connection. Tighten with a 11/16 inch wrench (between European sizes 17 and 18).

Hose composition

The base of the hose is made from antimicrobial thermoplastic polyurethane (TPU) polyether.
Outer coating: braided nylon for greater strength and suppleness. Withstands more twisting than conventional rubber hoses. Prevents the feeling that the regulator is pulling on the mouth.

What is the purpose of the medium-pressure hose?

The MP (medium pressure) hose, also called LP (Low Pressure), conveys the expanded air from the tank (compressed at high pressure) through the first stage and to the second stage of the regulator. The conveyed air is usually at a pressure of between 8 and 10 bar.

Tips on assembly

To not overtighten the first stage. First stages are usually made of chrome-plated brass, a soft alloy. Overtightening can damage the first stage. The O-ring on the hose is used for watertightening purposes.
On the second-stage connection, there is a cylindrical male part inside with an O-ring for watertightness.
Use a silicone grease to lubricate the seals and increase their lifespan.

Wear and replacement of the hoses

Repeated pressurisation of the regulator and external cracks will made the hose more fragile. This type of wear, usually invisible, affects the performance of your regulator. At the worst, your hose will end up by breaking, usually at the point where it is crimped.
Regularly check your hoses and replace them if cracked.
Replace your hoses at least every 5 years.

Servicing the regulators

SUBEA-TRIBORD advises you to service your regulator every two years and to make a visual inspection at least once a year. This two inspections must be made in a SUBEA-TRIBORD certified workshop.
A service is also recommended after a particularly intensive season (more than 100 dives), or after a long period of inactivity.
During this inspection, your hoses will be checked and replaced if necessary.

Taking care of regulators

Never use solvents or hydrocarbon-based products to clean or lubricate the regulator yourself. Never use spray cans, because the gas propellant can attack the plastic.
Use a silicone grease to lubricate the seals and increase their lifespan.

Weight

0.143 kg

See more See less

COMPOSITION / ADVICE

Composition
Air chamber
100.00% Thermoplastic polyurethane (TPU)
Rivet
100.00% Steel
Care instructions: Dry in a dry and ventilated place. Rinse in clean water after use.
Stock advice It is important to store diving equipment away from sources that produce ozone. Keep your equipment in a dry place away from heat and direct sunlight.
Restricted use : Diving requires the certification of a certified instructor.

OUR COMMITMENTS

All the SUBEA regulators were also developed through usability and convenience testing (static, dynamic and biomechanical analysis) conducted by DAN Europe, as a specialist and independent consultant. *DAN Europe (Divers Alert Network Europe) is an international non-profit medical and research organisation dedicated to the safety and health of divers.
Test Product Our technical partner: Planet Ocean (the PADI 5-star diving centre) based at the Water Sports Centre by Decathlon in Hendaye - France. The centre uses SUBEA diving equipment throughout the year. The team of instructors are rigorously involved in the development of our SUBEA products: from the design phase with the teams (product managers, designers and engineers), to the endurance tests with the help of the centre’s divers (from beginners to trainee instructors, all year long).
Guarantee : 2 Years

CUSTOMERS HAVE ALSO VIEWED

  • 45 - Diving - Regul. hose. 76cm HyperflexB SUBEA
    SUBEA 76CM SCD BRAIDED HYPERFLEX SCUBA DIVING REGULATOR HOSE BLACK
    From   £19.99
  • 45 - Diving - Hose SCD Hyperflex Octopus SUBEA
    SUBEA SCD BRAIDED HYPERFLEX SCUBA OCTOPUS HOSE YELLOW NEON
    From   £24.99
  • 45 - Diving - SCD Direct System Hose 76cm SUBEA
    SUBEA SCD DIRECT SYSTEM HOSE FOR SCUBA DIVING BUOYANCY COMPENSATOR 76CM - BLACK
    From   £17.99

YOUR REVIEWS

REVIEWS BY OUR TEAM MEMBERS

OUR CUSTOMERS PICTURES