| level of practice | all levels |
| frequency | occasional |
| fit | loose |
| type of opening/closing | zip |
| number of pockets | 4 pockets |
| customisation | customizable |
| zip type | full zip |
| removable hood | not removable hood |
| snow skirt | with snow skirt |
| ventilation system | with zip ventilation |
| waterproof | waterproof, water repellent |
| hood | with hood |
| inside pocket, ski pass pocket/sleeve, key/phone pocket, zip closed pocket, with pocket, closed pocket | |
| main material | polyester |
| style | with pattern, plain |
| mm H2O (Schmerbers) | 10,000 mm |
| type of length | at the hips |
| windproof | windproof |
| type of lining | wadding lining |
| season | winter, autumn |
| reinforced area | without reinforced area |
| sleeves length | long sleeves |
| reflective | without reflective zones |
| type of waterproofing | coating |
| RECCO system | without integrated RECCO system |
| sleeve finishing | without finishing |
| type of hood | adjustable hood, lined hood |
| breathability (in RET) | RET 6 < RET < 12 : moderately breathable |
| top length | long |
Main fabric: 100.0% Polyester |
Padding: 100.0% Polyester |
Main lining: 100.0% Polyester |
Coating: 100.0% Polyurethane |
Store on a hanger and do not fold, as this can damage the fabric coating. Dry thoroughly before storing in a dry and well-ventilated place.
Do not dry clean.
Drying in tumble dryer possible. Low temperature, maximum drum exhaust temperature 60°C.
Do not iron.
Maximum wash temperature of 30°C. Very moderate treatment.
Bleaching excluded.
| Raw material | 91% |
| Manufacturing | 2% |
| Packaging | 0% |
| Distribution | 3% |
| Use | 3% |
| End of life | 1% |
It is calculated by modelling the life cycle of the product following the recommendations of the PEF methodology (Product Environmental Footprint). This carbon footprint is an estimate. It may therefore be slightly overvalued or undervalued.Learn more
Using recycled polyester rather than conventional polyester reduces the CO2 emissions linked to the material by at least 16%.
Using this mass-dyeing process enables us to reduce CO2 emissions linked to the production of dyed textiles by at least 46% compared to conventional dyeing.
Using recycled polyamide rather than conventional polyamide reduces the CO2 emissions linked to the material by at least 30%.