Features

Design benefits

waterproof

Approved under a simulated rain storm (450 L/m2/hr) for 24 hours (3 x 8 hours)

breathability

3-layer breathable fabric (RET 15)

pockets

1 gusset pocket.

abrasion resistance

Reinforced knee and seat lined with removable articulated foam. Reinforced heel

Design details

WATERPROOFING

- 3-layer hydrophilic component. - >10,000 of water pressure after 5 washes - 100% taped seams. - Ankles adjustable by rip-tab strip - Synthetic rubber strip at the ankles for a better waterproof seal.

BREATHABILITY

RET <15: average breathability. To find out whether a fabric is breathable, we measure its evaporative resistance, or RET, (test based on the ISO 11092 standard). It is its ability to allow the water vapour produced by the body during exercise to escape.

POCKET

The large gusset pocket on the right thigh has a letterbox fastening and a storm cord which allows you to keep your equipment safe.

FEATURES

The waist is adjustable with semi-elasticated rip-tabs. The overtrousers also have an elasticated cord under the chest which adjusts with a toggle to ensure excellent hold. The knee, seat, and heel reinforcements are made of an abrasion- and wear-resistant component. They are equipped with removable articulated foam pads for added protection of the sailor's knees and seat.

HOW TO REACTIVATE THE ANORAK'S WATER REPELLENCY step 1: before washing

Close all zips and flaps and remove any parts of the clothing that cannot be washed. Also remember to loosen the straps and elastic parts and empty the pockets. Then turn the clothing inside out to wash it.

HOW TO REACTIVATE THE ANORAK'S WATER REPELLENCY step 2: washing

You can wash your jacket on a synthetic cycle at 30° or 40°C with your usual detergent. Do not use fabric conditioner, which could damage the existing performance of the garment, or bleach. Also take care not to bend your jacket too much when you place it in the washing machine and do not overload your machine. Very important: select a thorough rinse or double rinse to completely remove all detergent residue.

HOW TO REACTIVATE THE ANORAK'S WATER REPELLENCY Step 3: Drying

Drying is a crucial phase in reactivating the water repellent treatment. We recommend that you lay your jacket flat on a clothes rack and leave it out to dry in the open. Caution: never dry your jacket directly on a radiator. Then place them in the tumble dryer on a short synthetics cycle, i.e. 10 to 15 minutes, before turning it back the right way round. Caution: do not over-dry the garment.

HOW TO REACTIVATE THE ANORAK'S WATER REPELLENCY

If, despite this procedure of washing and thorough rinsing followed by gentle drying in a tumble dryer, the drops of water no longer run off the surface of your jacket, we recommend that you "re-waterproof" it using a waterproofing spray.

frequency	intensive
place of practice	outdoor
weather conditions	rainy weather
number of pockets	1 pocket
waterproof	waterproof
rain	heavy rainstorm
pocket	with pocket
type of length	long
main material	polyamide
windproof	windproof
fit	straight
belt height	mid waistband
reinforced area	without reinforced area
modular	not modular
stitching type	with seam
type of belt	without belt

Raw material	85.535%
Manufacturing	1.193%
Packaging	0.541%
Distribution	1.729%
Use	10.525%
End of life	0.478%

Women's OFFSHORE 900 waterproof overtrousers - Black

Features

Design benefits

Design details

Specifications

Details

Composition

Usage & care

Care instructions

Storage

Cleaning

Environmental impact

Carbon footprint