Women's Long-Distance Triathlon Trisuit
Swim, cycle and run with this trisuit! Designed by triathletes, this second skin follows the movements of your body during the 3 disciplines of your long-distance triathlons.
ID 8915649
- 2-year warranty
- 365 days to return for members
sitting comfortFine, soft, stretch gel skin suitable for the movements of the 3 sports.
quick dryingThe trisuit material dries quickly so you don't stay wet while you cycle!
pockets1 mesh pocket at the back and 2 thermoformed pockets on the side of the thighs.
breathabilityThe full-length zip opens like a gilet and lowers to the navel for ventilation.- THE TRISUIT = A 3 IN 1 PRODUCTThe trisuit is an iconic accessory for triathletes and a staple for triathlons. - For swimming, its fabric is similar to that of a swimsuit. - For cycling, its fine, soft skin adapts to your body shape and improves sitting comfort. The trisuit acts like cycling shorts, to be worn without underwear. - For running, its fine gel skin is almost unnoticeable: you can run lightly. All you have to focus on is crossing the finish line!
- THE SMALL DETAILS THAT CHANGE EVERYTHING!- This trisuit has thermoformed elastic at the arms and thighs, so doesn't move during use or when putting on a neoprene suit for the swimming leg. - The full-length zip opens like a gilet and allows you to ventilation during the race. It also makes toilet stops a lot easier! - The top of the trisuit is made of very lightweight material for more comfort and quick drying. The “shorts” part offers very good support.
- A TRISUIT ADAPTED TO WOMEN'S BODY SHAPEOverall, this trisuit is wider than the men's suit. It's fabric provides all the support and comfort you need for natural movement, without compressing. Its fine, super stretch gel skin adapts perfectly to your body shape and offers a good comfort density. A lining was added at the chest to conceal the bust of women triathletes who don't wear a bra, although we recommend wearing one.
- A PRODUCT DESIGNED TO CARRY NUTRITIONTo get to the finish line of a short-distance triathlon (3 to 6 hours of exertion), you need to eat! This trisuit has two thermoformed pockets on the thighs: you won't feel them as they are seamless and zip-free, plus the products they hold are under tension and don't move. There are also two net pockets at your lower back. In total with these four pockets, you can carry 10 bars and/or gels for refuelling!
- Trisuit, triathlon suit, triathlon trisuit... are there differences?None! It's the same type of triathlon outfit, a 3 in 1 suit: you pick you preferred term.Not to be confused with a neoprene wetsuit which provides buoyancy and insulation for the swim.
- SHOULD I PUT AN ADDITIONAL SUIT TO SWIM?It depends on the water temperature! The neoprene suit provides buoyancy, an asset for the swim leg. Good to know: The French Triathlon Federation forbids isothermal swimsuits when the water temperature is above 24°C and makes it compulsory when the temperature goes under 16°C. Between 16 and 24°C, it's up to you.
Features
Design benefits
Design details
Specifications
Details
| level of practice | intermediate |
| distance | long distance |
| zip type | full zip |
| with pocket | |
| main material | polyamide |
| type of length | above the elbow, mid-thigh |
| season | spring, summer |
| reinforced area | without reinforced area |
| stitching type | glued and blind stitched |
| pad | with pad |
| retaining strip | leg bottom, sleeves |
| pad type | gel |
Composition
Main fabric: 19.0% Elastane, 81.0% Polyamide |
Upper part - Main fabric: 31.0% Elastane, 69.0% Polyester |
Yoke: 35.0% Elastane, 65.0% Polyamide |
Pad - Outer fabric: 18.0% Elastane, 82.0% Polyester |
Underarm fabric: 16.0% Elastane, 84.0% Polyester |
Back fabric: 8.0% Elastane, 5.0% Polyamide, 87.0% Polyester |
Pocket: 24.0% Elastane, 76.0% Polyester |
Padding: 100.0% Silicone |
Pad: 100.0% Polyurethane |
Usage & care
Environmental impact
Ecodesign approach
Analysing the product's environmental footprint enabled us to identify the most impactful stages of its life cycle. Thanks to this approach, our design teams were able to develop this product while significantly reducing its environmental impact.More about our approach
Designed to reduce environmental impact
Product made with a CO2eq reduction of 10% compared to the previous or similar productOur design teams are working to develop processes that will reduce the impact of a product, while preserving its technical characteristics. This reduction relates to the following indicators: climate change, air pollution, water pollution and resource depletion.
