New Lower Price
Women's diving wetsuit 3 mm neoprene SCD 500 storm grey
Diving suit for warm waters. Comfortable and easy to put on!
ID 8518864
- 2-year warranty
- 365 days to return for members
thermal insulation3mm full-body diving suit. Seams taped with GBS glued & blind-stitched assembly.
easy dressingOne-piece diving suit with back zip.
freedom of movementAnatomic cut frees up arm movement. No seams under the armpits.
robustnessReinforcements to reduce wear on the knees.- Details of thermal insulation and reinforcement3 mm full-body one-piece wet type with back zip. Seams taped using a GBS (glued and blind stitched) assembly. Once a thin layer of water (that enters through the zip) gets trapped between your body and the diving suit, the water stays warm as it is not replaced. This thin layer of water keeps you warm. The diving suit has reinforcements to reduce wear on the knees.
- GBS (glued and blind stitched) assemblyThe diving suit's GBS assembly (Glued and Blind-Stitched) means that the seams are waterproof: the neoprene is glued and then stitched for extra (the needle does not go all the way through the neoprene to stop water getting through).
- Why use a 3 mm diving suit?Even in warm waters, the body ends up cooling down (25 times faster than in the air). Use a thin 3 mm diving suit that will allow you to delay this drop in temperature so that you can enjoy your activity for longer. In addition, use a full-body diving suit to fully protect you from UV rays and the underwater (coral, etc.).
- Thermal performance classThis scuba diving suit provides thermal protection that has been tested by the independent INPP institute (Marseille, France) in order to validate its compliance with the current standard (EN 14225-1:2017). This diving suit is certified for use in waters warmer than 25°C.
- What is a diving wetsuit?This is the most common type of diving suit on the market. It is not designed to keep the water out, but to trap it, so that your body then warms it up, creating a thermal buffer between you and the outside. Made of neoprene - a rubber polymer filled with air bubbles - these diving suits are available in thicknesses of 0.5 mm to 7 mm. Thanks to their suppleness and modularity, they constitute excellent diving suits.
- Tips on how to get into a diving suitPut your foot in a plastic bag. Then put your leg into your diving suit. Your foot comes out completely and smoothly! To adjust, ask someone to blow into your sleeve from the wrist. The incoming air inflates the interior of the neoprene diving suit, immediately separating it from your skin. You can then easily proceed with the final adjustments.
- Tips on how to take care of your diving suit11) Soak the inside and the outside of the diving suit in clean water after each session. 2) Clean with a bactericide solution. 3) Rinse thoroughly in clean water. 4) Dry on a wide hanger in a dark and well-ventilated place. Caution: the sun will cause the colours of the textile parts of the diving suit to fade and speeds up the ageing process of the neoprene. Zips can be cleaned with a toothbrush and lubricated with silicone grease.
Features
Design benefits
Design details
Specifications
Details
| level of practice | beginner, all levels |
| water temperature | water > 25°C, warm water |
| type of opening/closing | zip |
| zip type | back zip |
| neoprene thickness | 3 mm |
| age | over 14 years and adults |
| main material | neoprene |
| without pocket | |
| style | plain |
| number of pockets | pocket less |
| airtight/waterproof | not waterproof |
| type of length | long |
| condition | new |
| neck type | high neck |
| reinforced area | reinforced knees area |
| sleeves length | long sleeves |
| anti-uv | non anti-uv |
| sleeve finishing | without finishing |
| stitching type | glued and blind stitched |
| balaclava | without balaclava |
| suit | integral |
Composition
Foam: 100.0% Rubber |
Lining: 100.0% Polyamide |
Usage & care
Environmental impact
Ecodesign approach
Analysing the product's environmental footprint enabled us to identify the most impactful stages of its life cycle. Thanks to this approach, our design teams were able to develop this product while significantly reducing its environmental impact.More about our approach
Repairability
Product designed to be repairable on more than 80% of breakages and failures.Repairability is the ability to offer a solution in the event of product breakage or failure. The repairability of a product is defined according to 4 criteria: - The availability of instructions on how to repair the product for customers - The possibility of disassembling the product - The availability of spare parts - The price of the repair is lower than purchasing a new product Our goal is to cover any possible known break or repair a product might have. We think about the life span of a product from the design stage, to ensure that it lasts as long as possible.
