Waterproof Country Walking Shoes - NH150 WP - Menswear


Our walking designers created these NH150 WP waterproof shoes for occasional walks in plains or in the forest, in rainy weather.

Our lowest price waterproof in low-top walking shoes! They withstand two hours of hiking in fine rain. The rubber sole offers increased resistance and grip.

Color: Asphalt blue / Navy blue / Cherry red
Size: size guide


Similar Products

Product benefits



Waterproof, breathable membrane | Tested during a 2-hour walk in the rain



Open-cell rubber sole for off-road trails



The sole composition & design optimises grip and traction | 4mm studs

Anatomic design

Anatomic design

Removable insole, to fit your orthopedic shoes

Fitting comfort

Fitting comfort

Breathable 5 mm insole | Ankle collar: comfortable foam

Impact protection

Impact protection

Synthetic toe bumper at the front of the foot to protect you from stones



The sole design and 4mm studs help protect you from mud



Each shoe only weights 435 g for UK size 7

Technical information

Grippy soles on natural footpaths

This sole’s design is the result of long-term research carried out in our laboratories. We chose a specific rubber formula which optimises grip and resistance. Since not all needs are the same, we are always looking for the best solution to develop on loose, country trails such as unpaved forest paths.

Designed for use on country trails

Our walking shoes are designed for use on off-road trails. Indeed, we choose the components of the sole and upper of our boots and test them to ensure that they are ideally suited to walking on loose trails (e.g. unpaved forest paths) or rocky trails (e.g. rocky coastal paths). Road use (tarmac) may lead to premature wear on your boots and cause discomfort. They are not suitable for mountain walking.

Waterproofing test

Footwear equipped with a membrane is laboratory and field tested to ensure optimal waterproofing and breathability. To start, they are immersed in water with pressurised air inside to check that no bubbles form on the surface of the boot. Next, they are fitted to a mechanical arm that simulates walking half-immersed in water to test that the inside remains perfectly dry.

3 levels of waterproofing

In the impermeability test, we test 3 levels of waterproofing:
- 2000 flexes, about 2 hours of hiking
- 4000 flexes, about 4 hours of hiking
- 8000 flexes, about 8 hours of hiking
The NH150 WP shoes were tested for 2000 flexes in the laboratory. This means they will stay waterproof for a 2-hour hike.
Of course, as soon as the shoes are dry, they become waterproof again.

Laboratory tested

Laboratory tests were also conducted to test the following elements: tearing eyelets and straps, gluing, toxicology, UV resistance, abrasion resistance of outsole and upper components, accelerated ageing.These tests allow us to improve the quality of our products and prevent premature wear of our hiking shoes.

How to keep your boots waterproof for longer

We advise that you use a re-waterproofing spray several times per year, to restore the original water-repellency and prevent staining.

How to choose the size of my walking boots?

Try on both shoes, standing up, with the socks worn for hiking. Try on several models or sizes if necessary. Check two comfort points:
- the heel seating
- the front of the foot on a downward slope
Avoid any pressure points when fitting. Feel free to walk around the store. Gradually start using you shoes during your first few hiking trips to break them in.

The shoe/sock combination plays an important role

There are multiple factors which may cause blisters when you are walking: rubbing, a crease in the sock, moisture, a boot size that is too small or too big, etc. It is therefore important to choose the right size and to have socks made of the right material for your walking boots.

How to choose the size of my walking socks?

You need to choose the correct sock size for your feet to avoid any extra folds forming. These folds may form because the sock is too big and therefore there is too much material around your foot, or because the sock so small and is pulled towards the inside of your foot.

How to choose the fabric of my walking socks

Moisture must be effectively managed when walking: We sweat, it’s bound to happen. If your shoe is breathable, it will wick away moisture from your perspiration. It is therefore necessary to choose a light and breathable sock as well. If your boots are relatively waterproof, you will not make the same choice to protect you from the moisture of the rain: choose a sock which will absorb your sweat, and direct it as far as possible away from your foot.

What socks fit the NH150 WP shoe?

These shoes are slightly breathable, but not enough to evacuate all humidity created by your perspiration. We advise you to choose NH100 mid socks: they contain moisture-absorbing cotton and have a reverse terry-knit structure under the sock that wicks moisture away from your foot. They are also high enough to protect your ankle from the shoe. It is an excellent combination to reduce the chance of blisters.


Our hiking boots are guaranteed for 2 years.
Our commitment? To offer you long-lasting products that you can use on all your country hikes and walks. Because the products that we love the most are those that have lived the most adventures and will continue to live them!

Your opinion is important to us!

Thanks to your feedback, we have improved the design and concept of the NH150 WP waterproof shoes.
In this new model, we have raised the heel for a better support during walking. We have also added a mesh collar to improve comfort in the heel. Finally, we have changed the design to make it more modern.
But of course we didn’t change the price!


2 years

Product concept & technology

Product Composition

Upper of 50% Polyamide, 30% Polyurethane, 15% Polyester, 5% Elasthane Outer sole of 100% Rubber - Butadiene Rubber Lining and sock of 70% Polyester, 30% Polyurethane


We recommend you store your boots in a dry, dark and, if possible, ventilated place.

User Directions

Not suitable for hiking.


Our design team conceives, designs and creates Quechua products in France, at the foot of Mont Blanc.
We test them in the field with other hikers, to check their comfort and durability. Fontainebleau Forest or in Brittany, for example. We go on as many trails as possible, in all weather conditions. This creates plenty of opportunities for discussion to get your feedback which is used to plan our future products!

Maintenance advice

Hand wash. Do not tumble dry.

Customer reviews