Water bladder- 2 litres - trail running
Save time at the drink stations! Thanks to its wide opening, the water bladder is easy to fill and close. And with its 2L capacity, it provides up to 4 hours of trail running time.
ID 8618969
Sold by
- 2-year warranty
- 365 days to return for members
capacityEnjoy 4 hours of running time thanks to the 2L capacity of the water bladder.
Puncture resistanceIn response to your feedback, we've changed the bladder film and tube connector
easy maintenanceEasily fill and clean the bladder using the slide-top opening.
easy hydrationThe water bladder won't leak thanks to the On/Off closure of the bite valve.- A water bladder designed for replenishing your water supply during trail runs.With its 2L capacity, your water bladder will give you 4 hours of running time on average. And thanks to its wide open, you can quickly fill it at the drink stations. When closing it, you should feel the slide-top clip into place to ensure a perfect seal. Finally, the water bladder is compatible with the 15L trail running bag.
- A tube and an adjustable bite valve for superior comfort.You can easily cut the tube of the water bladder to your preferred length! To do this, remove the bite valve, put the tube in some hot water to soften it, cut it to the required length and replace the bite valve. The bite valve has an on/off closure system to prevent leaks during transportation. When running, it does not leak, even when it is in the open position. In order to get a good flow rate when you drink, pinch the bite valve with your mouth and suck!
- Composition, dimensions and maintenance of your water bladder:The components of your water bladder are guaranteed to be free of BPA (Bisphenol A) in accordance with current French regulations. It is 38 x 18cm in size with a 100cm tube. To prolong the lifetime of your water bladder, do not fold it, do not fill it with hot liquids and do not carry it upside down or by the tube ;)
- How to empty the air from your water bladderTo avoid hearing the noise of the water splashing about in the pouch while you are running, make sure you empty out all the air before starting! Just hold your water bladder upside down after filling it, guide the air bubbles towards the tube opening and suck them out. That's all there is to it. Now you can enjoy the silence while you run!
- Some tips for cleaning your water bladder:To avoid any taste of plastic when you drink, rinse your water bladder 3 times before using it for the first time. Whenever you clean your water bladder, remember to dry it thoroughly by leaving it open. If the taste of plastic persists, put your dry water bladder in the freezer overnight.
- How do we test a water bladder?To validate the quality of the 2L water bladder, it was tested in our in-house laboratory on a mannequin that replicates 1000 km of running with impacts. No faults were recorded and the product worked perfectly.
Features
Design benefits
Design details
Specifications
Details
| level of practice | all levels |
| frequency | all frequencies |
| intensity | low intensity, mid intensity, high intensity |
| distance | all distances |
| when | during effort |
| cap type | instant cap with pipette |
| volume | 1 L |
| autonomy | to 4 h |
| main material | polyurethane |
| volume (in L) | 2 L |
| isothermal | not isothermal |
| volume (in mL) | 2000 ml |
Composition
Film: 100.0% Thermoplastic Polyurethane |
Tube for bike: 100.0% Thermoplastic Polyurethane |
Handle: 100.0% Acrylonitrile Butadiene Styrene |
Sliding bar: 100.0% Thermoplastic Polyurethane |
Nipple: 100.0% Silicone |
Connector tube: 100.0% Thermoplastic Polyurethane |
On/Off system: 100.0% Polypropylene |
Usage & care
Environmental impact
Ecodesign approach
Analysing the product's environmental footprint enabled us to identify the most impactful stages of its life cycle. Thanks to this approach, our design teams were able to develop this product while significantly reducing its environmental impact.More about our approach
Repairability
Product designed to be repairable on more than 80% of breakages and failures.Repairability is the ability to offer a solution in the event of product breakage or failure. The repairability of a product is defined according to 4 criteria: - The availability of instructions on how to repair the product for customers - The possibility of disassembling the product - The availability of spare parts - The price of the repair is lower than purchasing a new product Our goal is to cover any possible known break or repair a product might have. We think about the life span of a product from the design stage, to ensure that it lasts as long as possible.