Adjustment

To adjust the paddle, open the latch, pull the handle to the desired length, then close the latch. The alignment rail ensures that the handle is properly in line with the blade. If it is not fastened tightly enough, open the latch and tighten the metal screw. The paddle should be adjusted to around 15-20 cm higher than your head: E.g.: One person measuring 1.85 m in height adjusts to approximately 2.05 m E.g.: for a person 1.50 m tall, adjust the paddle to 1.70 m

Disassembly

To disassemble the paddle, press the push pin on the back of the tube and pull on the parts to remove them. Disassembling the paddle allows it to be kept in the SUP bag, or put in a car boot. The disassembled paddle is 90 cm long.

Grip

For better grip on the shaft, apply a little wax to the handle.

Technical dimensions

Max. usage size: 205 cm Min. usage size: 165 cm Disassembled size: 90 cm Weight: 892 g

How to maintain your paddle

After a stand-up paddleboarding session, it is important to rinse your paddle with clean water. To avoid salt crystals building up on the tightening bolt, the push pin and inner tubes, rinse the paddle in warm water. So you increase the lifespan of your paddle.

Recommendations for use

The paddle is your means of travel and therefore of returning safely. Never leave your paddle floating in the water and risk losing it as it is not designed to float for more than one minute. If you take a break, leave the paddle on the board, attached to the elastics.

adjustable length	adjustable length
main material	aluminium
removable	removable
diameter (in mm)	29 mm
condition	new
weight (in g)	890 g
length (in cm)	165 to 205 cm
number of part	3 parts

SUP paddle separable Wattsup, adjustable in 3 sections (165–205 cm)

Features

Design benefits

Design details

Specifications

Details

Usage & care

Care instructions

Usage precautions

Storage

Cleaning