Stainless Steel Isothermal Food Box - 2L


Need to keep your food warm (or cold) for several hours? Our designers have developed this large insulated box that will do just that.

It is stainless steel on the outside, and very practical with its two food compartments included inside. It has a retractable handle and large capacity (two litres).



Home delivery or Click & Collect
Store stock checker

Product benefits


Starting temperature 95°C: 70°C after 6 hrs, 56° after 12 hrs, 40° after 24 hrs.

Ease of use

Large opening, screw-on cover, 2 food boxes included. Stainless steel.

Easy maintenance

Easy to clean thanks to its large opening. Stainless steel inner wall.

Easy transport

Large folding handle on the lid.


Dble wall stainless steel 18/8 (304) design with a vacuum between the two walls.

Technical information

Advice for maximising the performance of your isothermal flask.

Fill your food box with hot water for 5 minutes then replace the water with your hot food (either directly into the container or in the little boxes supplied.) Close the box.
The fuller the box, the more effectively it keeps its contents hot or cold.


2 food boxes included (0.35L and 0.65L) allowing you to separate food. WARNING!! For use in the microwave, it is essential to open the boxes. Do not heat in the closed position.
Do not leave food for more than 12 hours in the boxes or in the container.

Care instructions

Wash by hand, not in the dishwasher. Rinse in clean water, then leave to dry with the cap open.
Only the small food boxes may be washed in the dishwasher.

First use

Rinse the entire product 3 times with clean water before first use.

Materials and regulations

Our products and materials meet the food contact standards in force. They do not contain Bisphenol A (BPA) in accordance with the French regulations in force.

Weight and dimensions

Volume: 2 litres
Dimensions: Ø 15 cm x 22 cm
Weight: 1160g


2 years

Product concept & technology

Product Composition

Bottle/Body 100% Stainless Steel Inside room 100% Polypropylene Cap 100% Polypropylene Joint/Gasket 100% Silicon


Wash and dry before storing. Store in a clean, dry place.

User Directions

The casing is not dishwasher or microwave safe.


Our isothermal products are tested according to the same protocol: Water at 95°C is placed in the product which is then closed. The drop in temperature of the water is then measured after 6, 12 and 24 hours.

Customer reviews