Ski Touring Ski Pack + Bindings + Skins


We designed this pack for alpine skiing and the joys of ski touring in ski resorts.

The XLD 500 RT for everyday alpine skiing with your standard alpine skiing boots. Discover ski touring thanks to its locking snow brake.

Size: size guide


Product benefits



Ski on groomed slopes every day and discover cross-country skiing in resorts.



1 ski with Ambition 10 binding = 2,510 grams in 166 cm.

Ease of handling

Ease of handling

Front and rear rocker for initiating turns more easily



Average camber provides good stability at average speed on all types of snow.



The straight sidewalls spread the load along the full length of the ski

Ease of use

Ease of use

Available in packs with bindings and skins (cut to the length of the skis)

Technical information

Product improvement: skins net addition

Following your feedback left on our website, from September 2021 we’ve decided to add a skin net to our touring skis. Store the skins on the netting in order to maintain the stickiness of the adhesive.

What is Resort Touring

Resort Touring is our definition of ski touring in ski resorts.
Use the routes and trails marked by the ski resorts to climb up and down with ease on the ski slopes.
This lets you discover ski touring and understand the technical basics of the sport.
It is also appreciated by skiers looking for a training piste or a defined route to make easy progress.


The XLD 500 RT skis are sold as a pack with Tyrolia Ambition 10 bindings and skins.
The binding is fitted to a rail for adjusting its length. It is therefore suitable for a wide range of foot sizes.
The baseplate is mounted according to an assembly plan for each size in order to suit everyone's needs.
Thanks to this fitting, you can lend your skis, change the boot size, etc.
It is a huge advantage for easily introducing people to cross-country skiing.

Ski skins

The skins provided with the XLD 500 RT skis are sized and cut to the size and width of the ski.
They are made of 70% mohair and 30% synthetic materials – the ideal compromise in terms of gliding performance (when climbing in order to save energy) and grip (when climbing to avoid backsliding).
The skins are all fitted with a metal loop to fit most ski tips and an adjustable camlock on the back to fit the skin to the back of the ski.


Wood Sandwich construction with straight sidewalls.

What is a camber?

When placing a ski on the ground, its points of contact are found near the nose and tail, whereas the middle of the ski (under the bindings) is slightly raised (this is the camber). The longer and higher the camber, the greater the edge grip and more responsive the ski. The lower the camber, the more forgiving the ski and the better the handling.


The XLD 500 RT has a medium camber – good compromise between handling and edge grip.

What is a rocker?

On a "rocker" ski, the tip – and, sometimes, the tail – comes off the ground much sooner than with a cambered ski without a rocker. This moves the points of contact towards the centre of the ski. The surface of the ski in contact with the snow is shortened: they have better handling and more buoyancy on soft snow. When leaning into turns, the edge length offers more grip on hard snow. The longer the rocker, the better the handling of the ski.


The XLD 500 RT has a front and rear rocker (tip and tail), which provides good handling and makes it easy to turn on all types of snow.
On groomed slopes, this small rocker makes it very easy to effortlessly turn the skis.

What are ski sidecuts?

The sidecut is determined by 3 measurements: the width of the tip (front of the ski), the waist (middle of ski) and tail (back of ski). The wider the tip, the easier the turn entry. The narrower the waist, the stronger the grip in hard snow. The wider the waist, the more comfortable and stable in different snow conditions. The wider the tail, the more stable the ski is in turns. The narrower the tail, the better the glide.



158 cm = 122/78/111 cm Radius => 14m
166 cm = 122/78/111 Radius => 15m
174 cm = 122/78/111 cm Radius => 17m


Ski alone = 1420g (size 166cm).
Ski with Tyrolia Ambition 10 binding = 2,510 grams in size 166 cm.


Tyrolia detachable bindings that can be used with classic Alpine ski boots.
Adjustable DIN from 3 to 10

Adjustable for boot lengths from 260 to 340 mm

How do I choose my ski size?

The shorter the skis, the more manoeuvrable they are.
That's why beginners would be better off choosing shorter skis.

For ski touring, we generally recommend you choose skis:
between 5 cm and 10 cm less than your height.
The length can also change depending on where you're skiing:
In a resort, on marked routes: from -5cm to -15cm compared to the skier’s height,
In the mountains, from 0 to -10cm compared to the skier’s height.


2 years

Product concept & technology

Product Composition

Board 45% Wood, 20% Polyamide, 20% Glass - Fiber, 10% Steel, 5% Polyethylene


Dry the skins after each outing.
To prevent rust from forming on the ski edges, dry the edges and base after use, before storage.


This ski was tested by the Decathlon ski touring team and by independent testers under real-life conditions.


Ski Touring Ski Pack + Bindings + Skins
Ski Touring Ski Pack + Bindings + Skins
Ski Touring Ski Pack + Bindings + Skins
Ski Touring Ski Pack + Bindings + Skins
Ski Touring Ski Pack + Bindings + Skins
Ski Touring Ski Pack + Bindings + Skins


Similar Products

Customer reviews