Second life
0.8 L insulated stainless steel flask 900 with quick-release cap ...
Our second life products have been checked, cleaned and repaired by our expert technicians if necessary.
ID 8554867-B
- 1-year warranty
- 365 days to return for members
isothermalKeeps drinks warm for 1 day (23 hours) | Standard ISO12546-1
ease of useQuick opening with one hand, top can be locked with the handle. S/steel 370 g.
robustnessDouble stainless steel int. wall con.18/8 (304) with an air gap between the two.
easy maintenanceEasy to clean thanks to the screw top. Stainless steel internal wall.- How is heat insulation tested?We’ve tested this flask in the lab according to Standard EN 12546-1, at an ambient temperature of 20°C while filled to capacity. The time it takes to drop from 95°C to 50°C (drinks temperature considered warm enough to drink) is 23 hours.
- The secret of the insulated flask?This insulated flask’s stainless steel double wall with vacuum blocks heat by conduction and convection. A thin layer of copper reduces thermal exchanges by radiation. A few tips to improve thermal insulation: fill your flask with warm water for 5 minutes, and then replace the water with your hot liquids, then close. The fuller the bottle, the better the heat retention. Warning: the flask is very insulating, the liquids will remain hot for a long time.
- FunctionsThe top is easy to open with one hand by pressing on the white button marked "PRESS". When carrying the flask, you can lock this button by sliding the white button down. A red area appears, indicating that the top is locked and it can no longer be pressed. The top has an integrated filter to keep large tea leaves or infused fruits out of your cup. Not suitable for very fine cut teas.
- Care tipsDishwasher safe (top + body) Be careful not to lose the top seals. Dry with the top off. The top's seal can be removed for a complete wash and dry.
- First useRinse the entire product 3 times with clear water before using for the first time.
- Materials and regulationsOur products and materials meet the food contact standards in force. They do not contain Bisphenol A (BPA) in accordance with the French regulations in force. We have chosen to use 18/8 (304) stainless steel for the flask's body, recognised for its food safety and for the top, a heat and shock resistant polypropylene.
- Weight and dimensionsVolume: 0.8 litre Size: Ø 8.2 cm x 26.5 cm Weight: 366 grams (Body 320 grams and top 46 grams) Available in 0.5 L / 0.8 L / 1 L.
- Product design: our expertiseOur Quechua global design centre is based in Passy, at the foot of Mont-Blanc in Haute Savoie. This location makes it a real meeting place for our teams (designers, product managers, engineers, etc) and outdoor sports enthusiasts. A great asset for designing your mountain walking products and providing you with all our expertise.
- Condition VERY GOODComplete product - 100% functional and safe - some parts could be replaced - the product may show slight traces of use
- Control checkpointsAll our 2nd life products have been checked, reconditioned and repaired by our technicians. - Visual inspection of the product
Features
Design benefits
Design details
Specifications
Details
| level of practice | all levels |
| frequency | regular, all frequencies |
| cap type | quick-open cap |
| cook /drink/ eat | drink |
| main material | double wall stainless steel |
| volume (in mL) | 800 mL |
| isothermal | isothermal |
| volume (in L) | 0.8 L |
| condition | pre-owned |
Composition
Bottle body: 100.0% Stainless Steel |
Lid: 81.0% Polypropylene, 8.0% Silicone, 10.0% Polyamide, 1.0% Stainless Steel |
Usage & care
Environmental impact
Ecodesign approach
Analysing the product's environmental footprint enabled us to identify the most impactful stages of its life cycle. Thanks to this approach, our design teams were able to develop this product while significantly reducing its environmental impact.More about our approach
Designed to reduce environmental impact
Product made with a CO2eq reduction of 11% compared to the previous or similar productOur design teams are working to develop processes that will reduce the impact of a product, while preserving its technical characteristics. This reduction relates to the following indicators: climate change, air pollution, water pollution and resource depletion.