SCD braided Hyperflex SCUBA octopus hose yellow neon

£27⁹⁹

4.71 /5 Read all reviews

4.71/ 5 Write a Review

5

5
4

2
3

0
2

0
1

0

Item Code : 301909 8502968

Our Subea engineers designed this yellow hose for the scuba diver wishing to replace the hose of his octopus.

Hyper soft and hard-wearing neon yellow octopus hose. This hose can be adapted to all first stages of dive regulators and to all SCUBA diving octopuses.

Colour : Fluo yellow

Size size guide

Online Stock

Limited quantities available!

Currently out of stock

Let me know when back in stock

Know everything about privacy policy

Stock in Store

Suggested delivery option :

Get LNER discount with every Decathlon purchase. Read more

Close

Daily limit reached for online purchases.

PRODUCT BENEFITS

Flexibility

100 cm long neon yellow medium-pressure hose.

Durability

Braided nylon outer coating for greater strength and suppleness.

Impact protection

Comes with two hose sleeves to protect the crimping.

TECHNICAL INFORMATION

Technical specifications

Length: 100 cm.
First-stage connection: 3/8 UNF male connection. Tighten with a 9/16 inch wrench (between European sizes 13 and 14).
Second-stage connection: 9/16 UNF female connection. Tighten with a 11/16 inch wrench (between European sizes 17 and 18).

Hose composition

The base of the hose is made from antimicrobial thermoplastic polyurethane (TPU) polyether.
Outer coating: braided nylon for greater strength and suppleness. Withstands more twisting than conventional rubber hoses. Prevents the feeling that the regulator is pulling on the mouth.

What is the purpose of the medium-pressure hose?

The MP (medium pressure) hose, also called LP (Low Pressure), conveys the expanded air from the tank (compressed at high pressure) through the first stage and to the second stage of the regulator. The conveyed air is usually at a pressure of between 8 and 10 bar.

Tips on assembly

To not overtighten the first stage. First stages are usually made of chrome-plated brass, a soft alloy. Overtightening can damage the first stage. The O-ring on the hose is used for watertightening purposes.
On the second-stage connection, there is a cylindrical male part inside with an O-ring for watertightness.
Use a silicone grease to lubricate the seals and increase their lifespan.

Wear and replacement of the hoses

Repeated pressurisation of the regulator and external cracks will made the hose more fragile. This type of wear, usually invisible, affects the performance of your regulator. At the worst, your hose will end up by breaking, usually at the point where it is crimped.
Regularly check your hoses and replace them if cracked.
Replace your hoses at least every 5 years.

Servicing the regulators

SUBEA-TRIBORD advises you to service your regulator every two years and to make a visual inspection at least once a year. This two inspections must be made in a SUBEA-TRIBORD certified workshop.
A service is also recommended after a particularly intensive season (more than 100 dives), or after a long period of inactivity.
During this inspection, your hoses will be checked and replaced if necessary.

Taking care of regulators

Never use solvents or hydrocarbon-based products to clean or lubricate the regulator yourself.Never use spray cans, because the gas propellent can attack the plastic.
Use a silicone grease to lubricate the seals and increase their lifespan.

Warranty

2 years

Weight

0.143 kg

PRODUCT CONCEPT AND TECHNOLOGY

Product Composition

Protection cover : 100.0% Thermoplastic Polyurethane Rivet : 100.0% Brass

STORAGE ADVICE

It is important to store diving equipment away from sources that produce ozone. Keep your equipment in a dry place away from heat and direct sunlight.

TESTS

Our technical partner: Planet Ocean (the PADI 5-star diving centre) based at the Water Sports Centre by Decathlon in Hendaye - France. The centre uses SUBEA diving equipment throughout the year. The team of instructors are rigorously involved in the development of our SUBEA products: from the design phase with the teams (product managers, designers and engineers), to the endurance tests with the help of the centre’s divers (from beginners to trainee instructors, all year long).

User Directions

Diving requires the certification of a certified instructor.

Approved By

All the SUBEA regulators were also developed through usability and convenience testing (static, dynamic and biomechanical analysis) conducted by DAN Europe, as a specialist and independent consultant. *DAN Europe (Divers Alert Network Europe) is an international non-profit medical and research organisation dedicated to the safety and health of divers.