Sailing Yacht Racing Waterproof Salopettes Offshore Race 900 - Grey
3.9
These highly waterproof and breathable sailing salopettes will make life easier with their two-way zip, removable foam padding and adjustable shoulder straps and ankle cuffs.
ID 8546845
Home & store delivery
Unavailable
Pick up today at Decathlon
2-year warranty
365 days to return for members
Features
Design benefits
waterproof
Validated in a simulator reproducing STORM conditions
breathability
"Breathable" hydrophilic fabric
RET<20
abrasion resistance
Reinforced seat and knees.
3-layer fabric.
pockets
2 side pockets secure hand warmers. 1 "cargo" pocket on the thigh.
Design details
WATERPROOF
- A strong rain corresponds to a flow of 450L/m2/h - (= rainfall of 450mm/h)
- The rainfall simulator reproduces these conditions for 3*8 hours.
- Component resistant to water pressure of 10,000mm after ageing, = 10000 Schmerber - average pressure of water during a storm
- Water repellent components (water runs off the fabric).
- 100% taped seams.
- Central opening features a taped zip for optimal waterproofing
- Three-layer hydrophilic membrane fabric
FEATURES
- Reflective back patch to intensify low light sources
- Adjustable shoulder straps and ankle cuffs
- Preformed knees
- Detachable rear and knee pads
- Two-way watertight, anti-corrosion frontal zip
HOW TO REACTIVE THE JACKET'S WATER REPELLENCY
STEP 1: BEFORE WASHING
Close all zips and flaps and remove any parts of the garment that cannot be washed. Also remember to loosen the straps and elastic parts and empty the pockets. Then turn the garment inside out to wash it.
HOW TO REACTIVE THE JACKET'S WATER REPELLENCY
STEP 2: WASHING
You can wash your jacket on a synthetic cycle at 30° or 40°C with your usual detergent. Do not use fabric conditioner, which could damage the existing performance of the garment, or bleach.
Also take care not to bend your jacket too much when you place it in the washing machine and do not overload your machine.
Very important: select a thorough rinse or double rinse to completely remove all detergent residue.
HOW TO REACTIVE THE JACKET'S WATER REPELLENCY
STEP 3: DRYING
Drying is a crucial phase in reactivating the water repellent treatment.
We recommend that you lay your jacket flat on a clothes rack and leave it out to dry in the open. Caution: never dry your jacket directly on a radiator.
Then place it in the tumble dryer on a short synthetics cycle, i.e. 10 to 15 minutes, before turning it back the right way round.
HOW TO REACTIVE THE JACKET'S WATER REPELLENCY
FINISHING STEP
If, despite this procedure of washing and thorough rinsing followed by gentle drying in a tumble dryer, the drops of water no longer run off the surface of your jacket, we recommend that you "re-waterproof" it using a waterproofing spray sold in our stores.
Specifications
Details
frequency
intensive
rain
heavy rainstorm
Composition
Main fabric: 79.0% Polyamide, 21.0% Polyester
Yoke: 100.0% Polyamide
Main lining: 100.0% Polyester
Foam: 100.0% Ethylene Vinyl Acetate
Secondary lining: 100.0% Polyester
Usage & care
Care instructions
Cleaning
Do not dry clean.
Drying in tumble dryer possible. Low temperature, maximum drum exhaust temperature 60°C.
Do not iron.
Maximum wash temperature of 30°C. Very moderate treatment.