WADERS REPAIR INSTRUCTIONS

1. Turn your product inside out (repairs are made on the inside) 2. Position your product so as to reduce the tear or hole as much as possible 2. Cut the patch in a circle to size (1 cm larger than the hole). 4. Position the component over the hole (pay attention to the direction) 5. Place a piece of greaseproof paper over the components to protect them 6. Iron with a hot iron (level 3) for 45 seconds, paying particular attention to the edges 7. Leave to rest for 24 hours before use

INSTRUCTIONS FOR REPAIRING WATERPROOF CLOTHING

1. Turn your product inside out (repairs are made on the inside) 2. Position your product so as to reduce the tear or hole as much as possible 2. Cut the patch in a circle to size (1 cm larger than the hole). 4. Position the component over the hole (pay attention to the direction) 5. Place a piece of greaseproof paper over the components to protect them 6. Iron with a hot iron (level 3) for 20 seconds, paying particular attention to the edges 7. Leave to rest for 24 hours before use

COMPOSITION

The set includes: 2 8 x 8 cm squares + 1 12 x 12 cm square. 100% TPU

level of practice	all levels
place of practice	salt water, fresh water
condition	new

Raw material	91.532%
Manufacturing	0%
Packaging	0%
Distribution	3.226%
Use	0%
End of life	5.242%

Repair kit for waders (breathable and PVC) and waterproof clothing

Features

Design benefits

Design details

Specifications

Details

Composition

Usage & care

Care instructions

Usage precautions

Storage

Cleaning

Environmental impact

Carbon footprint