Features

Design benefits

waterproof

Validated in a simulator reproducing MODERATE RAIN conditions

breathability

Very breathable coated fabric (RET < 12).

resistance to salt water

Injected plastic zip.

lightweight

650 g.

Design details

WATERPROOFING

- Coated fabric - A moderate rain corresponds to a flow of 60L/m2/h - (= rainfall of 60mm/h) - The rainfall simulator reproduces these conditions for 2 hours. - Component resistant to water pressure of 2000mm after ageing (= 2000 Schmerber - average pressure of water during a downpour)  - Water repellent components (water runs off the fabric). - 100% taped seams. - Central opening features a flap with a drainage channel for optimal waterproofing

BREATHABILITY

RET <12: very breathable. To find out whether a fabric is breathable, we measure its evaporative resistance, or RET, (test based on the ISO 11092 standard). It is its ability to allow the water vapour produced by the body during exercise to escape.

RESISTANCE TO WEAR

- Injected plastic central zip resistant to salt oxidation.

HOW TO REACTIVATE THE JACKET'S WATER REPELLENCY? step 1: before washing

Close all zips and flaps and remove any parts of the garment that cannot be washed. Also remember to loosen the straps and elastic parts and empty the pockets. Then turn the garment inside out to wash it.

HOW TO REACTIVATE THE JACKET'S WATER REPELLENCY? step 2: washing

You can wash your jacket on a synthetic cycle at 30° or 40°C with your usual detergent. Do not use fabric conditioner, which could damage the existing performance of the garment, or bleach. Also take care not to bend your jacket too much when you place it in the washing machine and do not overload your machine. Very important: select a thorough rinse or double rinse to completely remove all detergent residue.

HOW TO REACTIVATE THE JACKET'S WATER REPELLENCY? step 3: drying

Drying is a crucial phase in reactivating the water repellent treatment. We recommend that you lay your jacket flat on a clothes rack and leave it out to dry in the open. Caution: never dry your jacket directly on a radiator. Then place it in the tumble dryer on a short synthetics cycle, i.e. 10 to 15 minutes, before turning it back the right way round.

How to reactive the jacket's water repellency?

If, despite this procedure of washing and thorough rinsing followed by gentle drying in a tumble dryer, the drops of water no longer run off the surface of your jacket, we recommend that you "re-waterproof" it using a spray sold in our stores.

frequency	occasional
rain	moderate rain
waterproof	waterproof
hood	without hood
style	plain
ventilation system	without ventilation
pocket	with pocket
main material	polyamide
type of length	at the hips
windproof	windproof
fit	straight
sleeves length	long sleeves

Raw material	92.099%
Manufacturing	1.526%
Packaging	0.459%
Distribution	2.698%
Use	2.395%
End of life	0.823%

Race 100 Men's boat regatta Anorak - black

Features

Design benefits

Design details

Specifications

Details

Composition

Usage & care

Care instructions

Cleaning

Environmental impact

Carbon footprint