Adjust the thickness, adjust your warmth!

When diving, cold is your worst enemy! Using the right thermal protection based on the water temperature, is essential. This concept was created to keep you from having to purchase different diving suits for different diving conditions, with 5 pieces that can be combined with your suit depending on the temperature. In this way, you can complete your thermal insulation with a hood, a neoprene top, a top with a hood, a 1 mm under-shorty or a 5.5 mm over-shorty.

Air Expulse System

Small holes pierced on the top of the hood to allow trapped air to escape. A small inner flap however avoids water from entering through these holes.

Tips on how to take care of your diving suit

1) Soak the inside and the outside of the diving suit in clean water after each session. 2) Clean with a bactericide solution. 3) Rinse thoroughly in clean water. 4) Dry on a wide hanger in a dark and well-ventilated place. Caution: the sun will cause the colours of the textile parts of the diving suit to fade and speeds up the ageing process of the neoprene. Zip fasteners can be cleaned with a toothbrush and lubricated with silicone grease

level of practice	all levels
water temperature	temperate water, cold water
neoprene thickness	3/2 mm
zip type	no zip
main material	neoprene
style	plain
type of opening/closing	none
airtight/waterproof	not waterproof
condition	new
reinforced area	without reinforced area
anti-uv	anti-uv

Raw material	83.861%
Manufacturing	6.244%
Packaging	1.01%
Distribution	2.827%
Use	6.229%
End of life	-0.171%

Diving top with hood 3/2 mm neoprene - Black/Grey

Features

Design benefits

Design details

Specifications

Details

Composition

Usage & care

Care instructions

Usage precautions

Storage

Cleaning

Environmental impact

Carbon footprint