Weinmann 4 Dot Retro Bicycle Brake Pad Inserts Salmon

Weinmann 4 Dot replacement pads for vintage Weinmann brake shoe holders.  Premium quality for original restoration projects with very good braking capacity compared to standard pads. They fit exactly with no need to trim

Key Features:

Pad contact width: 10 mm Length: 42.5 mm Weight: ca. 18 gr/pair An aggressive compounds for extreme all weather conditions especially in the wet, but still superb in the dry Made in the USA Supplied as two pairs / four pads

Installation Instructions:

1. Clean rim surface before installing new pads
2. Place new Kool-Stop Pads into brake caliper arms and finger tighten nuts
3. Squeeze brake lever to allow correct pad to rim alignment; tighten the nuts.  Do not over tighten
4. Break In Pads.  Full stopping power may not develop until after several braking applications have conditioned the rim surface.  Proper "toe in" alignment prevents brake chatter
5. Check the pad and rim alignment after the pads are broken in and after every ride
6. Important: Do not ride the bike until the brakes are checked and functioning properly.  Designed for bicycle use only.  All Kool-Stop Pads meet or exceed C.P.S.C and D.I.N bicycle standards