Supra 2 Threaded Bicycle Brake Pads Salmon

The Supra 2 is an updated design of the original Supra. This is one of the most popular rim pads and offers a thicker friction material for longer life. The pad with V brake washers can be fitted to the original "pad lock" gripper washer system which fits all types of brake systems

Key Features:

Hardened and plated reinforced steel backbone Patented angled tip plow Water grooves Knurl lock washer system Self tow in Available only in threaded Rim friendly compounds Weight: 58 g/pair Length: 66 mm Pad contact width: 9 mm An aggressive compounds for extreme all weather conditions especially in the wet, but still superb in the dry Made in the USA Supplied as a pair

Installation Instructions:

1. Clean rim surface before installing new pads
2. Place new Kool-Stop Pads into brake caliper arms and finger tighten nuts
3. Squeeze brake lever to allow correct pad to rim alignment; tighten the nuts.  Do not over tighten
4. Break In Pads.  Full stopping power may not develop until after several braking applications have conditioned the rim surface.  Proper "toe in" alignment prevents brake chatter
5. Check the pad and rim alignment after the pads are broken in and after every ride
6. Important: Do not ride the bike until the brakes are checked and functioning properly.  Designed for bicycle use only.  All Kool-Stop Pads meet or exceed C.P.S.C and D.I.N bicycle standards