Online only
Dura 2 Bicycle Brake Pad Bicycle Brake Pad Inserts Salmon
The Dura 2 insert designed for longer life. Ideal for narrow rims and with cut outs for reduced weight. Fitting Shimano, Sram, TRP and Tektro holders with a set screw
- Sold and shipped by Amba Distribution Limited
- Trusted Decathlon partner
- Online exclusive
- Clean rim surface before installing new pads
- Place new Kool-Stop Pads into brake caliper arms and finger tighten nuts
- Squeeze brake lever to allow correct pad to rim alignment; tighten the nuts. Do not over tighten
- Break In Pads. Full stopping power may not develop until after several braking applications have conditioned the rim surface. Proper "toe in" alignment prevents brake chatter
- Check the pad and rim alignment after the pads are broken in and after every ride
- Important: Do not ride the bike until the brakes are checked and functioning properly. Designed for bicycle use only. All Kool-Stop Pads meet or exceed C.P.S.C and D.I.N bicycle standards
Features
Redesigned the Dura 2 inserts are lighter and thicker than the original Dura inserts. This model does not have a plow tip and it is thicker thus lasts for a longer time. It has a 7.65 mm contact width for narrow rims and cut outs for reduced weight. The Dura 2 pads are the same spec as Shimano pads and fit Shimano, Sram, TRP and Tektro holders with a set screw. Fits road holders H2, H11 and H14. Also cross holders H6 and H7
Key Features:
Water grooves Reduced weight Rim friendly compounds 7 mm contact ideal for narrow rims Fits 55 mm length holders An aggressive compound for extreme all weather conditions especially in the wet, but still superb in the dry Weight: ca. 11 g/pair Made in the USA Supplied as a pair
Installation Instructions:
Specifications
Details
| weather conditions | rainy weather |
| length (in mm) | 55 mm |
| condition | new |
| position | front and rear |