Features

Design benefits

capacity

2 L water bladder, 7L bag volume

ease of use

The hose no longer crosses over the chest. Bite valve is easy to rotate.

multiple compartments

6 inside pockets and 3 sealable outside pockets + 1 outer net.

carrying comfort

The back is made of 3D foam. Ergonomic mesh straps for ventilation.

Design details

In a nutshell

Type of bag: hydration backpack Bag volume: 7L Volume of water: 2 L Water bladder with fastening strip, hose and bite valve included 6 inside pockets or nets 3 sealable outside pockets for easy access without removing the bag 1 outside net for gloves, a compact or windproof jacket 1 outside loop for glasses 1 outside helmet clip 1 insert for clip-on LED rear light 1 chest strap 1 waist strap Water-repellent

A large water bladder, sturdy and made in France.

With its 2-litre capacity, your water bladder will keep you hydrated for about 3 hours.With a wide opening for easy filling. When closing it, make sure the slider clips firmly into place to ensure it won't leak.Tested in the laboratory and made in France, its puncture resistance has been improved by 74%.

GETTING GOOD FLOW

Before leaving, squeeze the air out after filling so as to increase the flow rate of your drink. Just turn the water bladder upside down, direct the air bubbles towards the tube opening and suck them out. The mouthpiece is lockable (rotates 180°) to prevent leaks when not in use. It won't drip, even when in the open position. To drink, gently bite the mouthpiece and suck in!

CARRY ALL YOUR THINGS

2 sealable side pockets (telephone, cereal bars & tissues) & 1 pocket (multitool) underneath the bag for direct access. With the 6 inside pockets, everything else easily finds its place (documents, keys, tyre lever, repair essentials, pump and water chamber). The net on the outside can be used for gloves or a waterproof jacket. There are also clips on the outside to attach your helmet, glasses and a rear LED clip-on light.

CARE TIPS

To improve the robustness of your bag, we recommend waterproofing it. Even though the fabric is already water-repellent, extra waterproofing will stop mud getting caked onto it. After each ride, remember to wash and dry your water bladder using the cleaning kit (product ref. 5935596). If you don't want to get a plasticky taste, put your dry water bladder in the freezer. This will stop any flavour transfer.

Maintaining your products

Don't hesitate to consult our support sheet on water bladders to help you keep them in good condition.

Specifications

Details

level of practice	intermediate
intensity	mid intensity
type of opening/closing	zip
options	without rain cover
water bladder volume	water bladder 2 L
main material	polyester
waterproof	water repellent
volume (in L)	7 L
condition	new
type of practice	sport mtb
weight (in g)	550 g
water bladder included	water bladder included

Composition

Bag: 6.0% Polyurethane, 94.0% Polyester

Water pouch: 100.0% Thermoplastic Polyurethane

Usage & care

Product Manual

Everything you need to know

Download PDF

2-year warranty

Returns & exchange

Care instructions

Usage precautions

Warning! Not suitable for children under 6 years old

Storage

- Clean the water bladder with vinegar or bicarbonate of soda, - Put it in the freezer empty and dry to avoid the taste of plastic, - Dry it properly and do not fold it for storage.

Cleaning

Hand wash. Maximum temperature of 40°C.
Do not dry clean.
Do not iron.
Do not tumble dry.
Bleaching excluded.

Dry in the open air.
Clean with a wet cloth.

Environmental impact

Ecodesign approach

Analysing the product's environmental footprint enabled us to identify the most impactful stages of its life cycle. Thanks to this approach, our design teams were able to develop this product while significantly reducing its environmental impact.More about our approach

Dope dyed

Product made from 62% dope dyed yarn

Mountain Bike Hydration Backpack Explore 7L/2L Water - Black