Features

Design benefits

warmth

90% down and 10% feathers guarantee maximum warmth, hood under helmet.

breathability

3D mesh on the back and sides for good breathability

freedom of movement

3D mesh on the back for maximum freedom of movement

modularity

Maximum protection: High neck, hood that fits under the helmet

Design details

DESIGN

Down jacket (90% down and 10% feathers) for comfort and lightweight. We have added heat zones where you need them the most. Stretch areas on the back, sides and under the arms for freedom of movement. The stretch fabric is very breathable and also wicks away perspiration. A hood that fits under the helmet and high collar to protect you from bad weather.

Directions for use

During times of intense physical exertion, dressing too warmly can actually make you feel cold. The perspiration is unable to escape and therefore remains in constant contact with your skin. It’s beneficial to wear a liner jacket as you can take it off when the weather is mild. It's also important to open the vents before you get too hot and close them before you get cold when the intensity of your physical effort decreases, as it does on the ski lifts.

What should you wear under your skiing jacket?

To keep warm and dry, use the 3-breathable-layers rule: a ski base layer and a second layer liner jacket to retain warmth, a third layer ski jacket to protect you from bad weather. The base layer keeps you dry by wicking away the perspiration from the skin to the other layers. The second layer provides warmth. Such as down jackets, or fleece sweaters.

The third layer

This 3rd layer provides protection from the outdoor elements (snow, rain and wind) by keeping them out (while still letting perspiration escape from inside so you don’t feel wet). It should therefore ideally be waterproof AND breathable. The third layer (or layer 3) can also provide insulation in the case of lined trousers or jackets and complement the second layer.

Fill power of the down/feather filling

For this down jacket filled with 90% down and 10% feathers, the “filling power" is a measure of the down's thermal insulation capacity through its ability to "trap" a certain amount of air. So, down with a higher fill power (higher CUIN number) will occupy more space, trap more air and therefore provide greater thermal insulation.

How to wash your feather down jacket?

Here are a few tips: close all the zips on your down jacket and put it in the washing machine, synthetic cycle at 30°C. To maintain the filling and warmth, add 2 tennis balls in the machine. Be sure to select a gentle spin cycle: a fast spin cycle may create balls of feathers that are difficult to break up. View our advice by clicking the link below: https://www.forclaz.fr/conseils/comment-entretenir-sa-doudoune-en-plumes-tp_1

How to dry my down jacket?

When you take your down jacket out of the washing machine, it will seem as if the down has gone. THE TUMBLE DRYER is the best way to restore the fill power of the feathers. Put your down jacket in the tumble dryer with 2 tennis balls for 2-3 drying cycles. If you don’t have a tumble dryer, you can always dry your down jacket on a clothes horse and keep tapping it and turning it regularly. https://www.forclaz.co.uk/advice-alias/how-should-i-look-after-my-down-jacket-tp_2579

Your product is repairable.

This product is repairable. We commit to repairing your product free of charge for the duration of the warranty. Whatever it is, fixings, seams, zips, etc. This service is offered in your usual store. If, however, we can’t repair your product (non-repairable production defect), you can exchange it or get a refund.

Specifications

Details

level of practice	intermediate, advanced
frequency	intensive
weather conditions	cold weather
fit	fitted
zip type	full zip
waterproof	no waterproof
hood	with hood
main material	dual density, down
pocket	with pocket
type of length	at the hips
condition	new
windproof	not windproof
sleeves length	long sleeves
sleeve finishing	without finishing
type of hood	helmet-compatible hood
storage	without storage

Composition

Padding: 10.0% Grey Duck Feather, 90.0% Grey Duck Down

Main fabric - Outer layer: 17.0% Elastane, 83.0% Polyester

Main fabric - Inner layer: 15.0% Elastane, 85.0% Polyester

Lining: 100.0% Polyamide

Main fabric: 100.0% Polyamide

Main fabric - Middle layer: 100.0% Polyurethane

Specifications

Details

level of practice	intermediate, advanced
frequency	intensive
weather conditions	cold weather
fit	fitted
zip type	full zip
waterproof	no waterproof
hood	with hood
main material	dual density, down
pocket	with pocket
type of length	at the hips
condition	new
windproof	not windproof
sleeves length	long sleeves
sleeve finishing	without finishing
type of hood	helmet-compatible hood
storage	without storage

Composition

Padding: 10.0% Grey Duck Feather, 90.0% Grey Duck Down

Main fabric - Outer layer: 17.0% Elastane, 83.0% Polyester

Main fabric - Inner layer: 15.0% Elastane, 85.0% Polyester

Lining: 100.0% Polyamide

Main fabric: 100.0% Polyamide

Main fabric - Middle layer: 100.0% Polyurethane

Usage & care

2-year warranty

Returns & exchange

Care instructions

Storage

Store in a clean and dry place. Do not store folded.

Cleaning

Do not dry clean.
Drying in tumble dryer possible. Low temperature, maximum drum exhaust temperature 60°C.
Do not iron.
Maximum washing temperature 30°C. Normal treatment.
Bleaching excluded.

Wash alone.
Secure fasteners closed before washing. Gentle cycle, machine wash cold with like colors. Wash with mild detergent or down wash and 2 clean tennis balls. Do not use bleach or fabric softener. Rinse thoroughly at least twice. Tumble dry low with 2 clean tennis balls. Remove promptly and fluff after each cycle until dry. Do not dry clean, iron or steam. Store in a cool and dry location.
Do not use fabric softener.
Wash with zip closed.

Men's warm and breathable down ski liner jacket FR 900-light khaki

Features

Design benefits

Design details

Specifications

Details

Composition

Specifications

Details

Composition

Usage & care

Care instructions

Storage

Cleaning

Specifications

Details

Composition