Features

Design benefits

waterproof

Tested in heavy rain over 3 hrs. 15,000 mm Schmerber (JIS standard)

adjustable

Adjustable hood folds into collar. Double seals on sleeves, adjustable rip-tab.

windproof

Windproof fabric and lining

water repellent

Water pearls and streams off the fabric to keep you dry

Design details

WATERPROOFING

- Membraned 2-layer fabric - A strong rain corresponds to a flow of 100 l/m2/h - (= rainfall of 100 mm/h) - The rainfall simulator reproduces these conditions for 3 hours. - Component is resistant to water pressure of 15 000 mm - Water-repellent components (water runs off the fabric). - 100% taped seams. - Central opening features a flap with a drainage channel for optimal waterproofing

BREATHABILITY

RET <12: very breathable. To find out whether a fabric is breathable, we measure its evaporative resistance, or RET, (test based on the ISO 11092 standard). It is its ability to allow the water vapour produced by the body during exercise to escape.

Sleeves

The jacket has 2 cuffs on each arm to limit water ingress. They can be adjusted with a rip-tab, letting you easily put on a pair of mittens or gloves over the first cuff, then tighten the sleeve cuff above

Hood adjustments

It has 2 adjustable features: - an adjustment around the head to customise the hood in relation to the depth of the user’s face - an adjustment around the neck to press the hood against the face and limit the entry of air and water. The visor also keeps your face well protected from water trickling down. The hood can be stored in the collar.

The details providing great comfort

The collar is lined with fleece for increased comfort. The pockets are also lined with fleece to warm them up when sailing.

RESISTANCE TO WEAR

Injected plastic central zip resistant to salt oxidation. Outer fabric having good resistance to wear

HOW TO REACTIVATE THE ANORAK'S WATER REPELLENCY step 1: before washing

Close all zips and flaps and remove any parts of the clothing that cannot be washed. Also remember to loosen the straps and elastic parts and empty the pockets. Then turn the clothing inside out to wash it.

HOW TO REACTIVATE THE ANORAK'S WATER REPELLENCY step 2: washing

You can wash your jacket on a synthetic cycle at 30° or 40°C with your usual detergent. Do not use fabric conditioner, which could damage the existing performance of the garment, or bleach. Also take care not to bend your jacket too much when you place it in the washing machine and do not overload your machine. Very important: select a thorough rinse or double rinse to completely remove all detergent residue.

HOW TO REACTIVATE THE ANORAK'S WATER REPELLENCY step 3: drying

Drying is a crucial phase in reactivating the water repellent treatment. We recommend that you lay your anorak flat on a clothes rack and leave it out to dry in the open. Caution: never dry your anorak directly on a radiator. Then place it in the tumble dryer on a short synthetics cycle, i.e. 10 to 15 minutes, before turning it back the right way round.

HOW TO REACTIVATE THE ANORAK'S WATER REPELLENCY

If, despite this procedure of washing and thorough rinsing followed by gentle drying in a tumble dryer, the drops of water no longer run off the surface of your jacket, we recommend that you "re-waterproof" it using a spray sold in our stores.

level of practice	beginner, intermediate
frequency	regular
weather conditions	mild weather, windy weather, rainy weather, good weather, bad weather, variable weather, stormy weather
rain	heavy rain
fit	loose
neck type	zip neck
type of opening/closing	zip
number of pockets	3 pockets
tightening type	strap, sleeve, rip-tab
zip	with zip
reversible	not reversible
silent	not silent
zip type	full zip
snow skirt	without snow skirt
lining material	fleece, textile
waterproof	waterproof, water repellent
hood	with hood
main material	polyester
breathability	breathable
type of layer	layer 3
wind	10 to 16 knots, 16 to 20 knots, 20 to 26 knots
style	plain
membrane construction	2 layers
ventilation system	without ventilation
mm H2O (Schmerbers)	15,000 mm
pocket	cargo pocket, with pocket, closed pocket
tapping	full
type of length	at the hips
condition	new
water-repellent	water repellent
windproof	windproof
type of lining	non-removable lining, fabric lining
sleeves length	long sleeves
modular	not modular
stitching type	with seam
reflective	with reflective zones
type of waterproofing	membrane
thumb pass	without thumb pass
type of hood	adjustable hood, foldable hood
abrasion	with abrasion resistance
breathability (in RET)	RET 6 < RET < 12 : moderately breathable
top length	standard
storage	without storage
reinforced area	lower back

Raw material	81.063%
Manufacturing	4.603%
Packaging	0.905%
Distribution	7.179%
Use	4.351%
End of life	1.901%

Men's Sailing Jacket - Waterproof Jacket Sailing 500 red black

Features

Design benefits

Design details

Specifications

Details

Composition

Usage & care

Care instructions

Storage

Cleaning

Environmental impact

Carbon footprint

Ecodesign approach