Eco-Design
Media 0
Media 1
Media 2
Media 3
Media 4
Media 5
Media 6
Media 7
Media 8
Media 9
Media 10
Media 11
Media 12
Media 13
Media 14
Media 15
Media 16

Men’s Sailing jacket Offshore 900 - Red

£249.99

Developed with input from ocean racing skippers, this waterproof jacket provides optimal protection against bad weather.

It provides excellent water resistance and comfort. With a high polar collar, an adjustable hood and double sleeve seals, this jacket will be your best ally when you take on the weather!

Color: Scarlet red / Fluo yellow
Size: size guide

Quantity:

Learn more about Eco-Designed Products.

Similar Products

Product benefits

Waterproof

Waterproof

Fabric coated with 3 layers, resisting even heavy rainstorms. 20,000mm Schmerber

Adjustable

Adjustable

Adjustable hood, folds into collar. Double seals on sleeves, adjustable rip-tab.

Durability

Durability

Reinforced bottom of the jacket to ensure durability

Ecodesign

Ecodesign

Fabric and accessories make it possible to reduce environmental impact by 19%

Water repellent

Water repellent

Water pearls and streams off the fabric for lasting resistance again wet weather

Breathability

Breathability

3-layer breathable membrane, RET = 25, MVP 2000 g/m²/24h

Pockets

Pockets

5 pockets: 2 hand-warmers, 2 cargo pockets, and one secure pocket under the flap

Resistance to salt water

Resistance to salt water

Water-repellent YKK AquaGuard® zippers

Technical information

Developed and validated by ocean racers.

The Tribord Offshore 900 ranges have been developed and tested with navigators during a transatlantic race, as well as solitary offshore races, and on various boats: Jean-Baptiste Daramy on Class 40, Achille Nebout on Figaro 3, Romain Le Gall and Léo Bothorel on Mini 6.50.

The water resistance level

The fabric is made with a 3-layer membrane, resisting water pressure of up to 20,000 mm Schmerber, before and after 5 washes (test based on the ISO 811 standard). The higher the water pressure withstood by the fabric, the more waterproof it is.
The product has been tested using a rainstorm simulator, reproducing rainfall of 450 mm/h (450 L/M²/h) over 24 hours (3 x 8 hours)

Jacket waterproofing

- The neoprene sleeve seals covered with extra fabric limit water getting in.
- The seams are 100% watertight.
- A rigid visor has been integrated into the hood for greater protection.
- A wave guard/windbreaker layer inside the jacket. Fastenings with press studs. This fastening avoids water sprays getting into the jacket and overalls.

What is water repellency and how to maintain it

The fabric and fastenings are water-repellent.
A fabric is water-repellent when water slides off the surface without seeping in.
It won’t become waterlogged and remains lightweight and breathable. The water-repellent properties are achieved with a treatment (DWR) applied to the external side of the fabric, but these properties can be altered.
The water-repellent properties can be reactivated by putting the jacket (once it has been air-dried) in a drier for 10 minutes at the lowest temperature.

Breathability

To find out whether a fabric is breathable, we measure its evaporative resistance, or RET, (test based on the ISO 11092 standard). It is its ability to allow the water vapour produced by the body during exercise to escape.
To find out whether a fabric is breathable, we test its evaporate resistance or RET (ISO 11092 standard). The lower the fabric's resistance, the more moisture is evaporated, and therefore the higher the fabric's breathability.
This product’s RET is 25.

Double sleeve seals

Double sleeve seals:
- An adjustable neoprene section inserted into a soft, comfortable fabric on the inside of the sleeve seal to provide extra protection from incoming water in bad weather.
- An external sleeve seal in a waterproof material, which can be adjusted with velcro to protect the neoprene and provide optimal waterproofing.
Tips: if you wear mitts or gloves, wear them between the 2 sleeve seals for extra comfort and to avoid water getting in through any gaps or creases.

Pockets

The jacket has 5 pockets:
- 2 hand-warmer pockets, under the chest and sealed with YKK AquaGuard® zippers
- 2 cargo pockets at the waist
- 1 secure pocket under the flap with a YKK AquaGuard® zipper
Pockets have a drainage system to allow for water evacuation.

Resistance to wear

The jacket has reinforcements level with the buttocks, for increased resistance against abrasion.

What makes this product eco-designed?

We have designed and chosen exclusive fabric and accessories which make it possible to reduce the environmental impact of this product by 19% in comparison to the previous Offshore model. The main fabric used is 20% lighter than the fabric used in previous models and is 2 times more waterproof.

Recommended

The jacket weighs 1175 grams in Size L

How to choose the size of your jacket

The product sizing is generously cut. It’s been designed to be worn with thermal underlayers and a fleece underneath.
Choose your usual size.

How to wash your jacket

After use, rinse the jacket thoroughly with clean water, paying attention to the zippers, to remove any salt.
Dry on a clothes hanger in a well-ventilated place.
We recommend that you lay your jacket flat on a clothes rack and leave it out to dry in the open. Caution: never dry your anorak directly on a radiator.

How to wash your jacket Step 1

Close all zips and flaps. Also remember to loosen the straps and elastic parts (the hood) and empty the pockets.
Then turn the garment inside out to wash it.

How to wash your jacket Step 2

You can wash your jacket on a synthetic cycle at 30 °C with your usual detergent. Do not use fabric conditioner, which could damage the existing performance of the garment, or bleach.
Also take care not to bend your shell jacket too much when you place it in the washing machine and do not overload your machine.
Very important: select a thorough rinse or double rinse to completely remove all detergent residue.

How to reactivate the water repellency

Drying is a crucial phase in reactivating the water repellent treatment.
We recommend that you lay your jacket flat on a clothes rack and leave it out to dry in the open. Caution: never dry your anorak directly on a radiator or in direct sunlight.
Then place it in the tumble dryer on a short synthetics cycle, i.e. 10 to 15 minutes, before turning it back the right way round. Caution: do not over-dry the garment.

What’s the difference between a shell jacket and a sailing jacket?

The shell jacket has been adapted for manoeuvres at the bow of a boat (positions 1 and 2), and allows for increased protection in extreme weather conditions, thanks to its half-zip.
Nevertheless, the jacket is rather advised for less exposed positions, and its zipper allows for the jacket to be entirely opened, easily and quickly.

Warranty

2 years

Product concept & technology

Product Composition

Main fabric 100% Polyamide Underarm fabric 100% Polyester Hood fabric 100% Polyester Membrane 100% Polyurethane Back fabric 100% Polyester Wrist 90% Rubber - Styrene Chloroprene, 6% Polyamide, 4% Elasthane Warm lining 100% Polyester

STOCK ADVICE

Store in a dry, well-ventilated place, but do not leave your garment on a heat source such as a radiator, as this may damage the breathable membrane.

Approved By

Jean-Baptiste Daramy (Class 40), Achille Neboit (Figaro 3), Romain Le Gall and Léo Bothorel (Mini 6.50).

Maintenance advice

Machine wash - 30° max - gentle

Machine wash - 30° max - gentle

Do not bleach

Do not bleach

Do not tumble dry

Do not tumble dry

Do not iron

Do not iron

Do not dry-clean

Do not dry-clean

Customer reviews

Loading