New Arrival
Media 0
Media 1
Media 2
Media 3
Media 4
Media 5
Media 6
Media 7
Media 8
Media 9
Media 10
Media 11
Media 12
Media 13
Media 14
Media 15
Media 16

Men's Freeride Ski Padded Jacket FR500 - black

£139.99

Our designers developed this jacket for regular freeriders. Its heat pads keep you warm, and you can regulate the temperature using the vents.

Made for off-piste skiing, this waterproof and breathable jacket made of a 3-layer membrane will keep you comfortable in all weather conditions thanks to its heat pads and vents.

Color: Dark sepia
Size: size guide

Quantity:

Product benefits

Waterproof

Waterproof

15,000 mm rated membrane, fully taped seams and waterproof zip to keep you dry.

Breathability

Breathability

The membrane, placed heat pads and ventilation help wick away perspiration

Freedom of movement

Freedom of movement

Loose fit and stretch fabric that follow all your movements

Warmth

Warmth

The glued heat pads(100g/m² wadding)protect you where it's needed,without excess

Limits snow entering

Limits snow entering

Hood on helmet, storm cuffs and a snow skirt to face the winter.

Pockets

Pockets

5 secure pkts: 2 hand, 1 chest, 1 inside, 1 ski pass and 1 mesh pocket

Anatomic design

Anatomic design

3D hood adjustment that follows your movements.

Ventilation

Ventilation

Two large vents under the arms to lower the temperature after your runs.

Technical information

Warmth and breathability technology

Placed heat pads to provide good thermal protection during your freeriding outings.
This technology reserves a large area where the 3-layer membrane component can eliminate your perspiration more effectively.
A perfect compromise between a fully padded jacket and a 3-layer jacket without providing any additional heat.
Warmth and modular features to accompany you on your freeride outings throughout the season.

Additional features

Hood over helmet designed to offer maximum protection ensuring freedom of movement.
Adjustable to fit 3 sizes in a single movement, using a single tightening toggle located behind the head.

Tightening on the wrist and cuffs with thumb loop to prevent air and snow from getting in.
Snow skirt that also reduces draughts and prevents snow from getting inside.

Ventilation

To stay dry, it is important to wear a waterproof jacket. But you shouldn't end up wet with perspiration.
The vents play an important role in wicking away perspiration.
This is why we have equipped this jacket with two zipped air vents with two large zipped under the arms (35 cm in size L).

Cut

The wide fit, pre-shaped sleeves are there to free movement and enable you to ride in complete freedom.
We designed this jacket with one component that has mechanical stretch properties. You are still free to move around for your favourite rides and tricks!

Pockets

2 hand pockets with a waterproof zip.
1 inside chest pocket with watertight zip.
1 outer chest pocket with watertight zip.
1 pocket on the left pocket for your skipass with watertight zip.
1 quick access inner mesh pocket.

What should you wear under your skiing jacket?

To keep warm and dry, use the 3-breathable-layers rule: 1 skiing base layer, 1 intermediate layer liner jacket to retain warmth and 1 outer layer ski jacket to protect you from the elements.
C1: it keeps you dry by wicking away the perspiration from the skin to the other layers.
C2: it provides warmth, this is the case for down jackets or fleece pullovers.

The third layer

Protection from the outdoor elements (snow, rain and wind) by preventing them from entering (while still allowing perspiration to escape so that you do not feel "wet inside"). It should therefore ideally be waterproof AND breathable. The third layer can also provide insulation in the case of lined trousers or jackets. This complements the properties of the second layer.

Water repellency

The water-repellent property of a fabric is its ability to make water run off its surface without absorbing it. This prevents the fabric from becoming waterlogged and remains light, breathable and warm.
A fabric is made water-repellent by applying a treatment to its outer surface.
This treatment needs to be renewed during the lifetime of the garment (we recommend every 3 washes). All Wedze jackets have received a water-repellent treatment.

Component's waterproof properties.

The resistance of a fabric is measured by the height of a water column in mm that can be supported by the fabric (test based on the ISO 811 standard). The higher the pressure, the more waterproof the fabric. For example, a fabric with a waterproof rating of 10000 mm is therefore resistant to the pressure exerted by a 10000 mm column of water

Breathability of a component.

To find out whether a fabric is breathable, we test its evaporative resistance or RET (based on the ISO 11092 standard). The lower the fabric's resistance, the more water vapour generated by physical activity can escape and the higher the fabric's breathability. For example: RET < 9 = extremely breathable fabric / 9 < RET < 12 = very breathable fabric / 12 < RET < 20 = breathable fabric / RET > 20 = little or no breathability.

What is a membrane or coated component?

The coating is akin to a paint applied inside the fabric that makes the component waterproof while remaining breathable. It is often less expensive than a membrane and requires a liner to protect it. The membrane is a kind of very thin plastic film (polyurethane) that makes the component waterproof while remaining breathable. It has the advantage of being more flexible, lighter, more durable and often more breathable than a coating.

How do we make a garment waterproof?

The waterproof properties of the garment are related to its fabric, seam sealing and assembly design.
We then carry out shower tests on our garments.

Waterproofness/Shower test

This garment has been validated in a shower test under 100 L of water / sqm / hour for 3 hours.
This test reproduces the conditions of a heavy mountain storm.

How do we make a garment breathable?

In addition to the breathability of the fabrics used, we employ technical solutions (zips, vents, mesh) improving the overall ventilation of our jackets and trousers designed for Freeride skiing. These ventilation systems regulate the temperature inside the garment while also helping to eliminate the perspiration generated by the body during physical activity.

Product environmental impact comparison score

The product's environmental impact is calculated over its entire lifespan, using various indicators. An overall score from A to E is given to help you easily identify the most eco-friendly products by comparing products of the same type (T-shirts, trousers, backpacks etc.). Decathlon is committed to displaying the environmental information of its products.
For more information: http://sustainability.decathlon.com/

What is the RECCO® system?

All our Freeride and All-Mountain jackets and trousers are equipped with the RECCO® system.
With RECCO® technology, you can be located in the event of an avalanche. Someone who is equipped with RECCO® reflectors and is buried in the snow can be quickly and accurately located by the emergency services using the RECCO® tracker. RECCO® reflectors are not a substitute for an AVD. The RECCO® technology works as a complementary measure, increasing the chances of being found in time.

Tutorial on how to wash your waterproof garment

We recommend that you follow these guidelines at every wash in order to retain all the technical features of your garment.
Link: https://youtu.be/rh4GLwALgBM

After three washes, restore the water repellent properties with a waterproof spray or wash-in product.

Warranty

2 years

Product concept & technology

Product Composition

Main fabric 100% Polyester Padding 100% Polyester Main lining 100% Polyester Secondary lining 100% Polyamide Coating 100% Polyurethane Cuff 80% Polyester, 20% Elasthane

STOCK ADVICE

Dry this waterproof protective garment thoroughly before storing it.

TESTS

Our team of designers is based at the foot of the Mont-Blanc, near many ski resorts in Haute-Savoie (France). All year round, we create and develop products that are simple and technologically advanced. These are then ruthlessly tested in the field, because we believe that the only way to continuously improve our products is to test them under the real-life conditions that you will experience in use.

Approved By

A team of customers, Decathlon staff and ambassadors, all Freeriders, have tested and validated the characteristics of this jacket.

Maintenance advice

Machine wash - 30° max - normal

Machine wash - 30° max - normal

Do not bleach

Do not bleach

Tumble dry - low heat

Tumble dry - low heat

Do not iron

Do not iron

Do not dry-clean

Do not dry-clean

Similar Products

Pictures

Men's Freeride Ski Padded Jacket FR500 - black
Men's Freeride Ski Padded Jacket FR500 - black
Men's Freeride Ski Padded Jacket FR500 - black
Men's Freeride Ski Padded Jacket FR500 - black
Men's Freeride Ski Padded Jacket FR500 - black
Men's Freeride Ski Padded Jacket FR500 - black
Men's Freeride Ski Padded Jacket FR500 - black
Men's Freeride Ski Padded Jacket FR500 - black
Men's Freeride Ski Padded Jacket FR500 - black
Men's Freeride Ski Padded Jacket FR500 - black

Customer reviews

Loading