New Lower Price
Men's diving wetsuit 5 mm neoprene SCD 500 black and blue
A neoprene 5 mm wetsuit offering good thermal protection, to comfortably dive in temperate waters.
- 2-year warranty
- 365 days to return for members
thermal insulation5 mm full neoprene suit. Taped seams, glued and blind stitched assembly
easy dressingOne-piece diving suit with front zip fastener. Hood.
freedom of movementAnatomic cut frees up arm movement. No seams under the armpits.
robustnessPrinted reinforcements at the knees to reduce wear.- Details of thermal insulation and reinforcements to reduce wearFull one-piece wetsuit made of 5 mm neoprene panels (with production tolerance), covered on both sides with a nylon fabric. Seams taped using a GBS (glued and blind stitched) assembly. Front zip. The diving suit has printed reinforcements on the knees to reduce wear.
- GBS (glued and blind stitched) assemblyThe seams of the suit and hood are waterproof, with a glued and blind stitched (GBS) assembly: the neoprene is glued and then stitched for extra robustness (the needle does not go all the way through the neoprene to stop water getting through).
- Thermal performance classThis scuba diving suit provides thermal protection that has been tested by the independent PRS Certification institute (Gdansk, Poland) to validate its compliance with the current standard (EN 14225-1:2017). CLASS C certified diving suit: A (+7°C/+12°C / +45°F/+54°F) B (+10°C/+18°C / +50°F/+64°F) C (+16°C/+24°C / +61°F/+75°F) D (+22°C/+30°C / +72°F/+86°F).
- Adjust the thickness, adjust your warmth!When diving, cold is your worst enemy! Using the right thermal protection based on the water temperature, is essential. This concept was created to keep you from having to purchase different diving suits for different diving conditions, with 5 pieces that can be combined with your suit depending on the temperature. In this way, you can complete your thermal insulation with a hood, a neoprene top, a top with a hood, a 1 mm under-shorty or a 5.5 mm over-shorty.
- What is a diving suit?This is the most common type of diving suit on the market. It is not designed to keep the water out, but to trap it, so that your body then warms it up, creating a thermal buffer between you and the outside. Made of neoprene - a rubber polymer filled with air bubbles - these diving suits are available in thicknesses of 0.5 mm to 7 mm. Thanks to their suppleness and modularity, they constitute excellent diving suits.
- Tips on how to get into a diving suitPut your foot in a plastic bag, then slip your leg into your diving suit. Your entire foot comes out without snagging! To adjust, ask someone to blow into your sleeve from the wrist. The incoming air inflates the interior of the neoprene diving suit, immediately separating it from your skin. You can then easily proceed with the final adjustments.
- Tips on how to take care of your diving suit1) Soak the inside and the outside of the diving suit in clean water after each session. 2) Clean with a bactericide solution. 3) Rinse thoroughly in clean water. 4) Dry on a wide hanger in a dark and well-ventilated place. Caution: the sun will cause the colours of the textile parts of the diving suit to fade and speeds up the ageing process of the neoprene. Zip fasteners can be cleaned with a toothbrush and lubricated with silicone grease
Features
Summary
A 5 mm diving suit developed by our design team of diving enthusiasts, for beginner divers in temperate waters (16°C to 24°C).
ID: 8544637
Design benefits
Design details
Specifications
Details
| level of practice | beginner |
| water temperature | 16 < water < 24°C, temperate water |
| type of opening/closing | zip |
| zip type | front zip, half zip |
| neoprene thickness | 5 mm |
| removable hood | not removable hood |
| main material | neoprene |
| without pocket | |
| number of pockets | pocket less |
| airtight/waterproof | not waterproof |
| type of length | long |
| condition | new |
| reinforced area | reinforced knees area |
| sleeves length | long sleeves |
| anti-uv | non anti-uv |
| sleeve finishing | without finishing |
| stitching type | glued and blind stitched |
| neck type | high neck |
| style | two-tone |
| balaclava | with balaclava, balaclava integrated |
| suit | integral |
Composition
Foam: 100.0% Rubber |
Lining: 100.0% Polyamide |
Usage & care
Environmental impact
Ecodesign approach
Analysing the product's environmental footprint enabled us to identify the most impactful stages of its life cycle. Thanks to this approach, our design teams were able to develop this product while significantly reducing its environmental impact.More about our approach
Repairability
Product designed to be repairable on more than 80% of breakages and failures.Repairability is the ability to offer a solution in the event of product breakage or failure. The repairability of a product is defined according to 4 criteria: - The availability of instructions on how to repair the product for customers - The possibility of disassembling the product - The availability of spare parts - The price of the repair is lower than purchasing a new product Our goal is to cover any possible known break or repair a product might have. We think about the life span of a product from the design stage, to ensure that it lasts as long as possible.
