Men and Women's Freestyle Bindings - Burgundy

£79.99

Binding for intermediate to advanced snowboarders with maximum precision, comfort (EVA pad) and a flexible highback.

1. Full EVA pad for more cushioning 2. Strap with 3D foam for support & comfort 3. Soft highback 4. Screwdriver-free strap adjustment 5. Gas pedal (adjusting the length of the binding)

Color: Deep chocolate truffle
Size: size guide

Quantity:

Product benefits

Fit

Fit

Very good support at high speed on red & black runs off-piste and in the park

Fast acting

Fast acting

Turn Strap: 180° strap opening. Unhindered, quick foot entry.

Adjustable

Adjustable

Gas Pedal (length of fix), front-rear spoiler, straps without screwdriver

Cushioning

Cushioning

Full EVA pad, comfort and optimum cushioning, at a 2° inward angle.

Anatomic design

Anatomic design

M: 4 to 7, L: 8 to 13

Stability

Stability

Conventional fastening: pump up to the required level of support. No limit.

Capacity

Capacity

Pair of bindings + 2 discs + 8 x 16 mm screws compatible with discs + 8 washers

Compatibility

Compatibility

Only for use with boards with regular inserts (not 3D or Chanel Burton).

Technical information

After-sales parts list

_ ref. 8576569: 2 pairs of ankle strap fittings
_ ref. 8576639: 1 pair of ankle straps / size M for shoe sizes 3 to 7
_ ref. 8576638: 1 pair of ankle straps / size L for shoe sizes 8 to 12
_ ref. 8576572: 2 pairs of toe strap fittings
_ ref. 8576632: 1 pair of toe straps / size M for shoe sizes 3 to 7
_ ref. 8576632: 1 pair of toe straps / size L for shoe sizes 8 to 12

After-sales parts list (continued)

_ ref. 8576631: 2 toe strap screws + 2 ankle strap screws
_ ref. 8576629: 2 spoiler fitting screws
_ ref. 8576658: 1 disc + 4 screws and 4 spacers

Programme/terrain

The Endzone 500 binding is a high performance all-mountain/freestyle snowboard binding to go anywhere: on-piste, off-piste and even in parks, at any level.
Its highback is flexible which makes it comfortable and forgiving of mistakes.
Its full EVA pad guarantees bon cushioning on landing after jumps.

Opening mechanism

Turn Strap System: the strap is mounted onto a hinge, which allows it to turn inwards when you lift your foot.
When putting the boot on, the space is therefore free to insert the boot into the binding without any discomfort. This also prevents the strap and the hooks getting crushed with the boot.

Adjustment options

The original settings are suitable for most users. But you can also adjust it as you see fit:
- the position of the highback (front/rear/side) by moving the position of the screws that hold it
- the length of the gas pedal, which is particularly useful for people with big feet.

Stance, binding spacings

The stance is the distance between the 2 bindings in cm. It can be adapted according to your body shape but be aware that all snowboards have a recommended stance for bindings (shown by a mark between the binding inserts). If you want to position your feet further apart or closer together on the board, do the test to see if you are best placed.

How do I change my stance on the board?

For on-piste/off-piste boards, if you want to position your feet closer together it is best to move only the front binding further back, and if you want to move your feet further apart it is best to move only the rear binding further back. The aim is to be set a little further back to take the turns better on piste and to float on powder snow.
For freestyle boards (generally twintip, symmetrical), it is best to move the 2 bindings to remain centred on the board.

At what angle should I put my snowboard bindings?

For a freeride run, we recommend +18° at the front and 0° at the rear. For a versatile freestyle run, try +18° et -6°. The rear foot opening lets you change when riding switch.
For pure freestyle runs, choose completely symmetrical angles such as +15° et -15° for example.
Angle choice on bindings is a very personal thing. Feel free to check out what others are doing and try out different options. You might be pleasantly surprised!

Don't forget to centre your boot on your board!

Disc bindings with 4 screws can slide along a single axis and generally have 5 possible settings. This setting is used to centre the boot on the snowboard and prevent the foot from protruding over the edge of the board too much, otherwise you will fall! Your boot must protrude by an equal amount on both sides of the board. You can also rotate the disc 90° to increase or decrease the stance in relation to that provided by the inserts. In this case, the bindings can’t be centred laterally.

What size should I choose for my snowboard bindings?

For the endzone 500 bindings, we recommend: M = 3 to 8 / L = 8 to 12.
But just as you would always try on a shoe with your own foot, we strongly recommend trying on the bindings with your snowboard boots because, depending on the brand, a particular size of boot can vary in volume.

Warranty

2 years

Product concept & technology

Product Composition

Frame 100% Polyamide 6 Strap 50% Thermoplastic Polyurethane, 25% Steel, 25% Leather

STOCK ADVICE

Regularly tighten all the screws on the bindings.
Storing for the summer: you can leave the bindings on the snowboard.

User Directions

Not suitable for wide heel boots > 95 mm: risk of wear

TESTS

All Decathlon's Snowboarding products are tested in real conditions of use for which they were designed. Under the snow, in the cold, in all weather conditions when snowboarding on powder, in the snowpark, or on the runs. Our design teams, product managers, engineers and pattern makers ensure the product's design corresponds perfectly to its real-world use.

Approved By

Dedicated snowboarders. Are you interested in become one of our testers? Contact us on our website!

Similar Products

Pictures

Men and Women's Freestyle Bindings - Burgundy
Men and Women's Freestyle Bindings - Burgundy
Men and Women's Freestyle Bindings - Burgundy
Men and Women's Freestyle Bindings - Burgundy
Men and Women's Freestyle Bindings - Burgundy

Video

Customer reviews

Loading