Features

Design benefits

warmth

Double wadding lining (2 X 200g/sqm) on the body. 200 g/sqm layer on the arms

waterproof

Waterproof membrane 15 000 mm H²O (Schmerber). 100% taped seams

limits snow entering

Anti-blizzard hood (synthetic fur), cuffs, waist tightening

ease of use

Zips and press studs that are easy to use with gloves Inside mesh pocket

Design details

Can I be sure that my jacket is warm enough for my winter hikes?

We developed your jacket for intense wintry conditions: intense cold, snow, blizzards. The insulation is provided by thick wadding made of a synthetic component that insulates by trapping air in its fibres (double layer on the body and single layer at the arms). We added a long inner flap underneath the zip to stop cold air from entering. The system is supplemented by a drawcord at the hem to make the jacket comfortable down to -20°C.

How does my jacket protect me from outdoor conditions?

Your jacket is designed with a waterproof outer component that keeps out water and wind. To keep you warm in winter you must also protect your extremities (head, hands, feet). The anti-blizzard hood with detachable synthetic fur, wrist sleeves and a rising collar prevent cold infiltration. The high handwarmer pockets with fleece lining are perfect for protecting your hands in a comfortable position.

WATERPROOFNESS OF THIS JACKET

The waterproofness of a jacket isn’t limited to just its components: the assembly technique of the different parts is also an evaluation criterion. Whether heat-sealed or sewn then waterproofed, the overall waterproofness of your jacket is measured using a shower test developed by Decathlon, which simulates rain of different intensities. As such, this waterproof jacket protects you from a downpour, i.e. 12 cm of rain in 2 hours.

COMPONENT WATERPROOFING OF THIS JACKET

The waterproofness of a fabric, provided by a coating or membrane, is measured in Schmerber or mm H²0 (pressure exerted by a column of water). The higher this number, the more waterproof the fabric. This jacket has a waterproof component (JIS 1092 standard) resistant to 15,000 mm H²0 (Schmerbers) before washing.

A practical jacket with smart details

Practical and smart details: 2 hand warmer pockets, 2 outside pockets with flap, 1 secure inside pocket, 2 inside mesh pockets to have everything close at hand. The main zip has a long zipper pull and press studs and thumb pass so you can open or close your jacket while keeping your hands tightly snug in your gloves. The 2 easy zips at the bottom of the jacket allow you to bend or sit down comfortably.

A comfortable, unique style extreme cold jacket

We designed this jacket with a comfortable fit so that it could be worn with a warm second layer such as fleece or light down jacket. Its longline parka style is ideal for protecting you from the cold and wind during your winter hikes in large hilly areas or in the mountains.

Will my jacket withstand regular use over the long-term?

To ensure the durability of our products, we perform tests on the selected components: resistance to rubbing and abrasion, colour fastness, resistance to repeated washing. All these tests have been carried out on the component on your jacket.

How to preserve the technical qualities of my jacket?

A fabric's water repellent property is its capacity to make water run off its surface without seeping in. This prevents the fabric from soaking up water and keeps it lightweight, warm and breathable. The water repellent property is achieved by treating the fabric's exterior. This treatment must be renewed throughout the garment's lifespan (recommended after each wash). Products (spray or liquid) for this purpose are available in our stores.

How to dress properly for snow hiking?

To dress properly in winter, whatever your activity, we recommend using the 3-layer principle: layer 1: The high-tech base layer transfers moisture away from the body to keep your skin dry. layer 2: The second layer (fleece, sweater) provides warmth and transfers moisture outwards. layer 3: The jacket protects you from the outdoor conditions: rain, snow, wind. The whole outfit must be breathable in order to eliminate moisture.

Specifications

Details

frequency	intensive
ventilation system	with zip ventilation
main material	synthetic
waterproof	waterproof
hood	with hood
pocket	snap button, inside pocket, zip closed pocket, warm fleece pocket
fit	standard
style	plain
membrane construction	2 layers
mm H2O (Schmerbers)	15,000 mm
windproof	windproof
lining material	synthetic
type of length	mid-thigh
season	winter, autumn
sleeves length	long sleeves
type of waterproofing	membrane
sleeve finishing	without finishing
type of hood	adjustable hood, anti-blizzard hood, removable fur, lined hood

Composition

Main fabric: 100.0% Polyester

Filling: 100.0% Polyester

Lining: 100.0% Polyester

Synthetic fur: 90.0% Acrylic, 10.0% Polyester

Cuff: 20.0% Elastane, 80.0% Polyamide

Membrane: 100.0% Polyurethane

Usage & care

2-year warranty

Care instructions

Storage

We advise you to wash your jacket with the zip closed. Always make sure that this waterproof garment is completely dry before storing it.

Cleaning

Do not dry clean.
Drying in tumble dryer possible. Low temperature, maximum drum exhaust temperature 60°C.
Do not iron.
Maximum washing temperature 30°C. Normal treatment.
Bleaching excluded.

Remove synthetic fur lining before washing.
Wash inside out.
Wash with zip closed.

Environmental impact

Carbon footprint

Kg CO2 eq.

41.545

Contribution

Raw material	87%
Manufacturing	1%
Packaging	1%
Distribution	3%
Use	6%
End of life	3%

Ecodesign approach

Analysing the product's environmental footprint enabled us to identify the most impactful stages of its life cycle. Thanks to this approach, our design teams were able to develop this product while significantly reducing its environmental impact.More about our approach

Recycled polyester

Product made from 66% recycled polyester

Dope dyed

Product made from 9% dope dyed yarn

Men’s Winter Waterproof Hiking Parka - SH900 -20°C