New Lower Price
Sailing Waterproof Anorak - Waterproof Windproof Anorak SAILING 100 blue DDY
This waterproof and breathable sailing jacket with a high collar is lightweight and easy to adjust for optimal comfort during all your outings. Withstands moderate rain for 2 hours
ID 8678296
- 2-year warranty
- 365 days to return for members
waterproof100% taped seams 2-layer coating 5,000 mm Schmerber
windproofFabric specially coated to reduce the cooling effect of the wind.
pockets3 closed pockets, 1 interior Non-waterproof pockets
breathabilityVery breathable coated fabric (RET < 12): reduces condensation- Waterproofing 1/2We measure the fabric resistance to water pressure in mm of water column (based on the JIS standard). The higher the water pressure withstood by the fabric, the more waterproof it is. On our Sailing 100 jacket: Component is resistant to water pressure of 5,000 mm Schmerber (JIS standard). This equates to the average pressure applied by the water during a rain shower. The anorak’s waterproofness was tested in a rain shower with 60 litres of water/m²/hour for 2 hours.
- Waterproofing 2/2- High collar - Injection-moulded plastic to avoid salt oxidation - Water-repellent components (water runs off the fabric) - 100% taped seams - Central opening features a flap with a drainage channel for optimal waterproofing
- HoodThe hood does not pack down into the collar, it is attached. Completely depth and height-adjustable hood. Visor with a headband to provide a good level of protection and a better hold. The high neck effectively protects the neck.
- Pockets2 zip pockets on the front of the jacket to put your hands or some items 1 inside pocket on the right side of the chest with a rip-tab closing NOTE: the pockets are NOT WATERPROOF
- Front zip closureA zip on the entire jacket length with an interior flap protects against the wind and water. Soft fabric flap on the top of the collar to protect the chin.
- Fabric breathabilityTo find out whether a fabric is breathable, we test its evaporate resistance or RET (ISO 11092 standard). The lower the fabric’s resistance, the more moisture is evaporated, and therefore the higher the fabric’s breathability. We consider that if: RET < 9 = highly breathable fabric 9 < RET < 12 = breathable fabric The RET of the Sailing jacket 100 is 12.
- Water-repellent properties informationA fabric is water-repellent when water slides off the surface of the fabric, without seeping in. Your jacket does not become waterlogged and remains lightweight and breathable. The water-repellent properties are achieved with a treatment applied to the external side of the fabric, but in practice these properties can be altered. The water-repellent properties can be reactivated by putting the jacket in a dryer for 10 minutes at the lowest temperature.
- How to wash your jacket?To maintain the water repellent properties, infrequent washing is recommended. Close all zips and flaps, empty all pockets and then turn the garment inside out to wash it. You can wash it on a synthetic cycle at 30°C or 40°C with your usual detergent. Do not use fabric conditioner, which could damage the existing performance of the garment, or bleach. Very important: choose a full rinse cycle or extra rinse.
- How to reactivate the jacket’s water repellencyDrying is a crucial phase in reactivating the water repellent treatment. We recommend that you lay your jacket flat on a clothes rack and leave it out to dry in the open. Caution: never dry your jacket directly on a radiator. Then place them in the tumble dryer on a short synthetics cycle, i.e. 10 to 15 minutes, before turning it back the right way round. Caution: do not over-dry the garment.
Features
Design benefits
Design details
Specifications
Details
| level of practice | beginner |
| frequency | occasional |
| weather conditions | rainy weather |
| rain | moderate rain |
| neck type | zip neck |
| type of opening/closing | zip |
| number of pockets | 3 pockets |
| customisation | customizable |
| reversible | not reversible |
| zip type | full zip |
| type of lining | light |
| snow skirt | without snow skirt |
| waterproof | waterproof, water repellent |
| hood | with hood |
| zip closed pocket, with pocket, closed pocket | |
| breathability | breathable |
| fit | standard |
| style | plain |
| membrane construction | 2 layers |
| ventilation system | without ventilation |
| mm H2O (Schmerbers) | 5,000 mm |
| main material | polyamide |
| type of length | at the hips |
| condition | new |
| windproof | windproof |
| lining material | synthetic |
| reinforced area | without reinforced area |
| sleeves length | long sleeves |
| modular | not modular |
| stitching type | with seam |
| reflective | without reflective zones |
| type of waterproofing | coating |
| sleeve finishing | without finishing |
| type of hood | adjustable hood, hood with visor |
| breathability (in RET) | RET 6 < RET < 12 : moderately breathable |
| top length | standard |
| storage | without storage |
Composition
Upper part - Main fabric: 100.0% Polyamide |
Lower part - Main fabric: 100.0% Polyamide |
Main lining: 100.0% Polyester |
Sleeve lining: 100.0% Polyester |
Coating: 100.0% Polyurethane |
Usage & care
Environmental impact
Ecodesign approach
Analysing the product's environmental footprint enabled us to identify the most impactful stages of its life cycle. Thanks to this approach, our design teams were able to develop this product while significantly reducing its environmental impact.More about our approach
Designed to reduce environmental impact
Product made with a CO2eq reduction of 10% compared to the previous or similar productOur design teams are working to develop processes that will reduce the impact of a product, while preserving its technical characteristics. This reduction relates to the following indicators: climate change, air pollution, water pollution and resource depletion.
