New Lower Price
Men’s diving jacket with hood 5.5 mm neoprene SCD black and blue
Above all easy to put on and take off. This diving two-piece wetsuit allows you to choose a top and a bottom of different sizes that are better adapted to your stature.
ID 8330584
- 2-year warranty
- 365 days to return for members
thermal insulation5 mm neoprene jacket. Taped seams with a GBS glued and blind stitched assembly.
easy dressingThis two-piece wetsuit is easy to put on and take off.
modularityYou can mix and match overalls and jacket sizes.
freedom of movementAnatomic cut for free arm movement, no seams under the armpits.- Details of thermal insulation5.5 mm neoprene wetsuit jacket with front zip. 5mm neoprene foam, covered with nylon fabric on both sides. Seams taped using a GBS (glued and blind stitched) assembly. With this 2-piece wetsuit, you can choose a sleeveless overalls and jacket of different sizes. Weight of the wetsuit (size L): 1.580 kg.
- GBS (glued and blind stitched) assemblyThe seams of the suit and hood are waterproof, with a glued and blind stitched (GBS) assembly: the neoprene is glued and then stitched for extra robustness (the needle does not go all the way through the neoprene to stop water getting through).
- Ease of movement / Putting on and taking off the diving suitOne-piece diving suit with an attached hood equipped with the Air Expulse system: a system to evacuate air bubbles trapped in the hood. The crotch strap is fixed and the wetsuit easy to put on with the diagonal zip on the front. No underarm seams for easier arm movements.
- Thermal performance classThis scuba diving suit provides thermal protection that has been tested by the independent INPP institute (Marseille, France) in order to validate its compliance with the current standard (EN 14225-1:2005). CLASS C certified diving suit: A (+7 °C/+12 °C / +45 °F/+54 °F) B (+10 °C/+18 °C / +50 °F/+64 °F) C (+16 °C/+24 °C / +61 °F/+75 °F) D (+22 °C/+30 °C / +72 °F/+86 °F).
- What is a diving suit?This is the most common type of diving suit on the market. It is not designed to keep the water out, but to trap it, so that your body then warms it up, creating a thermal buffer between you and the outside. Made of neoprene - a rubber polymer filled with air bubbles - these diving suits are available in thicknesses of 0.5 mm to 7 mm. Thanks to their suppleness and modularity, they constitute excellent diving suits.
- Tips on how to get into a diving suitPut your foot in a plastic bag, then slip your leg into your diving suit. Your entire foot comes out without snagging! To adjust, ask someone to blow into your sleeve from the wrist. The incoming air inflates the interior of the neoprene diving suit, immediately separating it from your skin. You can then easily proceed with the final adjustments.
- Tips on how to take care of your diving suit1) Soak the inside and the outside of the diving suit in clean water after each session. 2) Clean with a bactericide solution. 3) Rinse thoroughly in clean water. 4) Dry on a wide hanger in a dark and well-ventilated place. Caution: the sun will cause the colours of the textile parts of the diving suit to fade and speeds up the ageing process of the neoprene. Zips can be cleaned with a toothbrush and lubricated with silicone grease
Features
Design benefits
Design details
Specifications
Details
| level of practice | beginner |
| water temperature | 16 < water < 24°C, temperate water |
| type of opening/closing | zip |
| zip type | front zip, full zip |
| neoprene thickness | 5 mm |
| removable hood | not removable hood |
| main material | neoprene |
| number of pockets | pocket less |
| airtight/waterproof | not waterproof |
| condition | new |
| reinforced area | without reinforced area |
| sleeves length | long sleeves |
| anti-uv | non anti-uv |
| stitching type | glued and blind stitched |
| neck type | high neck |
| style | two-tone |
| balaclava | with balaclava, balaclava integrated |
Composition
Foam: 100.0% Rubber |
Lining: 100.0% Polyamide |
Usage & care
Environmental impact
Ecodesign approach
Analysing the product's environmental footprint enabled us to identify the most impactful stages of its life cycle. Thanks to this approach, our design teams were able to develop this product while significantly reducing its environmental impact.More about our approach
Repairability
Product designed to be repairable on more than 80% of breakages and failures.Repairability is the ability to offer a solution in the event of product breakage or failure. The repairability of a product is defined according to 4 criteria: - The availability of instructions on how to repair the product for customers - The possibility of disassembling the product - The availability of spare parts - The price of the repair is lower than purchasing a new product Our goal is to cover any possible known break or repair a product might have. We think about the life span of a product from the design stage, to ensure that it lasts as long as possible.
