Features

Design benefits

waterproof

GOOD: 5000 mm-rated coating and fully-taped seams

breathability

The RET12 breathable component and air vents help to eliminate perspiration

freedom of movement

Keep freedom of movement thanks to its cut and preformed sleeves

warmth

100 g/sqm wadding. 1/2 zip and long cut for staying warm

Design details

3D HOOD AND FACE PROTECTION

We added a 3D hood with automatic tightening to this ski jacket. It moves with your kids’ head without obstructing it to provide better protection against bad weather. It is compatible with helmets. The hood is preformed with a high collar for protecting the face in case of intense cold or strong wind.

AIRTIGHT

AT THE CUFFS: Wide, adjustable sleeves designed to fit over gloves. Elastane cuffs providing a perfect seal between the gloves and the jacket. AT THE WAIST: The automatic snow skirt prevents snow and draughts from entering when practising wintersports, and especially in the event of a fall. It is ideally combined with the BIB PROTECT salopettes to provide great protection for young freeriders.

Water repellency

The water-repellent property of a fabric is its capacity to allow water to run off its surface without seeping in. Our jackets have water-repellent components that prolong their bad weather resistance. This is an additional technical solution for staying dry for as long as possible! You should repeat this treatment regularly using the products sold in our stores to maintain these properties.

Component waterproofing

The resistance of a fabric is measured by the height of a water column in mm that can be supported by the fabric (test based on the ISO 811 standard). The higher the pressure, the more waterproof the fabric. A fabric with a waterproof rating of 5000 mm is therefore resistant to the pressure exerted by a 5000 mm column of water

Breathability of a component

To find out if a fabric is breathable, we measure its total evaporative resistance RET (test based on the ISO 11092 standard). This is the capacity of the ski jacket to allow the water vapour produced by the body to escape during physical activity so that you stay dry. The lower the RET, the more breathable the fabric. For example: RET < 9 = extremely breathable fabric / 9 < RET < 12 = very breathable fabric / 12 < RET < 20 = breathable fabric / RET > 20 = little or no breathability

How do we make a garment waterproof?

The waterproof properties of the garment are related to its fabric, seam sealing and assembly design. Using a waterproof ZIP or adding a flap to the zip (covers the zips with a waterproof fabric flap).

How do we make a garment breathable?

In addition to the breathability of the fabrics used, we employ technical solutions (zips, vents, mesh) improving the overall ventilation of our jackets and trousers designed for Freeride skiing. These ventilation systems regulate the temperature inside the garment while also helping to eliminate the perspiration generated by the body during physical activity.

What is the difference between a membrane and a coating?

This jacket has a membrane: it’s a kind of very thin plastic film (polyurethane) that makes the component waterproof while remaining breathable. It has the advantage of being flexible, lightweight, durable and often more breathable than a coating, which is similar to having a layer of paint applied to the inside the fabric. It makes the component waterproof while remaining breathable. It is often less costly than a membrane and requires a lining for protection.

Your product is repairable

This product is repairable. We commit to repairing your product free of charge for the duration of the warranty. Whatever it is, fixings, seams, zips, etc. This service is offered in your usual store. If, however, we can’t repair your product (non-repairable production defect), you can exchange it or get a refund.

What is the RECCO® system?

With RECCO® technology, you can be located in the event of an avalanche. Someone who is buried in the snow can be quickly and accurately located by the emergency services using the RECCO® tracker and reflectors. RECCO reflectors are not a substitute for an AVD. The RECCO® technology works as a complementary measure, increasing the chances of being found in time. All our Freeride jackets and trousers are equipped with the RECCO system.

Waterproof garment washing tutorial

We recommend that you follow these guidelines at every wash in order to retain all the technical features of your garment. Link: https://youtu.be/rh4GLwALgBM After three washes, restore the water repellent properties with a waterproof spray or wash-in product.

level of practice	intermediate
frequency	regular
weather conditions	heavy snow, cold weather
fit	loose
snow skirt	with snow skirt
ventilation system	with zip ventilation
waterproof	waterproof
hood	with hood
pocket	pocket with flap, inside pocket, ski pass pocket/sleeve, zip closed pocket, with pocket, closed pocket, kangaroo pocket
main material	polyester
style	plain
mm H2O (Schmerbers)	5,000 mm
windproof	windproof
lining material	synthetic
type of length	mid-long
season	winter
sleeves length	long sleeves
type of waterproofing	coating
RECCO system	with integrated RECCO system
thumb pass	without thumb pass
type of hood	helmet-compatible hood

Kids’ Ski Jacket FR500 - Beige

Highlights

Highlights

Highlights

Features

Design benefits

Design details

Specifications

Details

Composition

Testing

Usage & care

How to use

How to repair or replace

Care instructions

Storage

Cleaning

Environmental impact

Ecodesign approach