| level of practice | advanced |
| frequency | intensive |
| weather conditions | cold weather |
| fit | fitted |
| number of pockets | 2 pockets |
| customisation | customizable |
| type of belt | rip-tab belt |
| place of practice | resort touring |
| waterproof | waterproof |
| main material | polyester |
| mm H2O (Schmerbers) | 10,000 mm |
| with pocket | |
| condition | new |
| windproof | windproof |
| belt height | high waistband |
| modular | not modular |
| reinforced area | lower leg reinforcement |
| RECCO system | without integrated RECCO system |
| straps | removable straps |
| type of length | ajustable |
Main fabric: 100.0% Polyester |
Filling: 100.0% Polyester |
Lining: 100.0% Polyester |
Yoke: 97.0% Polyamide, 3.0% Polyester |
Membrane: 100.0% Polyurethane |
Store on a hanger and do not fold as this could damage the fabric coating. Dry thoroughly before storing in a dry and well-ventilated place.
Do not dry clean.
Drying in tumble dryer possible. Low temperature, maximum drum exhaust temperature 60°C.
Do not iron.
Maximum washing temperature 30°C. Normal treatment.
Bleaching excluded.
| Raw material | 82% |
| Manufacturing | 2% |
| Packaging | 1% |
| Distribution | 2% |
| Use | 12% |
| End of life | 2% |
It is calculated by modelling the life cycle of the product following the recommendations of the PEF methodology (Product Environmental Footprint). This carbon footprint is an estimate. It may therefore be slightly overvalued or undervalued.Learn more
Using recycled polyester rather than conventional polyester reduces the CO2 emissions linked to the material by at least 16%.
Using this mass-dyeing process enables us to reduce CO2 emissions linked to the production of dyed textiles by at least 46% compared to conventional dyeing.